What type of rivets?

Finishes, paints and coatings

What type of rivets?

Postby Justin1983 » Sun Feb 07, 2016 4:33 pm

My trailer walls are steel framed. I will be skinning the trailer in aluminum. What type of rivets do I use to mate these dissimilar metals? Steel, aluminum, or stainless rivets?
Justin1983
Teardrop Inspector
 
Posts: 10
Joined: Sat Mar 28, 2015 8:41 am

Re: What type of rivets?

Postby dales133 » Sun Feb 07, 2016 7:13 pm

Stainless , but it will still likly react eventualy
User avatar
dales133
4000 Club
4000 Club
 
Posts: 4605
Images: 1
Joined: Mon Oct 13, 2014 5:26 pm

Re: What type of rivets?

Postby Treeview » Sun Feb 07, 2016 9:00 pm

Closed end blind rivets for sure.

http://ecx.images-amazon.com/images/I/32i9GcSAqoL.jpg

Material...stainless sounds like a good choice.
User avatar
Treeview
The 300 Club
 
Posts: 498
Images: 30
Joined: Sun Nov 27, 2011 9:22 am
Location: Land of 10,000 Lakes
Top

Re: What type of rivets?

Postby MtnDon » Sun Feb 07, 2016 9:21 pm

You can minimize the galvanic action with a tape between the steel and the aluminum skin. Use Google
Our 6x12 deep vee nose cargo trailer camper conversion... viewtopic.php?f=42&t=58336

We have a small off grid cabin we built ourselves in the NM mountains; small PV solar system; 624 watts PV, Outback CC & inverter/charger ... http://countryplans.com/smf/index.php?topic=2335.0
User avatar
MtnDon
2000 Club
2000 Club
 
Posts: 2200
Images: 24
Joined: Sun Aug 19, 2012 10:57 pm
Location: New Mexico
Top

Re: What type of rivets?

Postby GuitarPhotog » Sun Feb 07, 2016 9:32 pm

Galvanic/cathodic corrosion is pretty slow if the surface isn't constantly exposed to salt water. My aluminum skinned trailer is attached to its angle iron frame with aluminum rivets. The trailer was built in 1948 and I am seeing a few (~10) failures due to corrosion. Several of those have occurred in the last 2-5 years.

<Chas>
:beer:
GuitarPhotog
Silver Donating Member
 
Posts: 1779
Images: 55
Joined: Tue Feb 08, 2011 12:52 pm
Location: Grants Pass Oregon
Top

Re: What type of rivets?

Postby greygoos » Mon Feb 08, 2016 9:42 am

I have built food carts using stainless and aluminum over steel framing. I almost always use stainless steel in the shop. Just keep in mind that using a hand rivet gun and stainless rivets can be a task. I use an air powered rivet gun or occasionally for repair work a 2 hand rivet gun for the stainless. Aluminum rivets are a lot easier to pop and can be done with an inexpensive gun.
greygoos
Silver Donating Member
 
Posts: 630
Joined: Sun Sep 27, 2015 6:15 am
Location: Syracuse NY
Top

Re: What type of rivets?

Postby Redneck Teepee » Mon Feb 08, 2016 10:19 am

This might shed some light on a preferable way to get the best long term results. :)

http://trailer-bodybuilders.com/fabrica ... lar-metals
I fear the day that technology will surpass our human interaction, the world will have a generation of idiot's.
User avatar
Redneck Teepee
Silver Donating Member
 
Posts: 853
Images: 21
Joined: Fri Dec 27, 2013 5:00 pm
Location: Central Ca.
Top

Re: What type of rivets?

Postby Justin1983 » Mon Feb 08, 2016 4:44 pm

Thanks guy's! Looks like sealed stainless rivets are the best option for corrosion purposes. I will have a barrier between steel frame and aluminum skin. The trim will also be coated.
Justin1983
Teardrop Inspector
 
Posts: 10
Joined: Sat Mar 28, 2015 8:41 am
Top


Return to Skinning secrets

Who is online

Users browsing this forum: No registered users and 4 guests