Unusual Designs Found on Internet

Design & Construction of anything that's not a teardrop e.g. Grasshoppers or Sunspots

Unusual end A-frame

Postby WizardOfOdds » Sat Feb 27, 2016 9:52 pm

Image
Image
Sorry, links below went bad
Image
Image
Sadly, the above links are no longer valid, probably because they were removed by the owner.
There is more here http://www.trademe.co.nz/motors/caravans-motorhomes/caravans/up-to-12-ft/auction-1037087112.htm

Update.... I found new links to photos that work here
http://tventuring.com/trailerforum/thread-40-page-46.html

Image
Image
Last edited by WizardOfOdds on Mon Jul 24, 2017 4:36 pm, edited 4 times in total.
WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia

Mini Clam Shell Kit

Postby WizardOfOdds » Sat Apr 16, 2016 10:03 pm

I always liked the foam shell kits from (on-again, off-again) Teal International. It did not take long to recognize his roof shell of this kit which caught the attention of the Smart for 2 crowd
Image
Catch the post here
http://www.smartcarofamerica.com/forums/f77/mini-camper-kit-smart-fortwo-76721/
I did not find any mention of it at the Teal home page.
WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia

Unusual Clam top with Slide-Out Motorhome

Postby WizardOfOdds » Sat Apr 16, 2016 10:13 pm

This motor home uses the folded flat roof and passenger side to form an 45 degree twin sloped open roof held up by a slide out (from Japan). One thing I don't like is that the the closed height must be about the same as the body width to get the peak at the center of the base.

Image

More info at

http://www.can-baco.co.jp/karucan.html
Update (3 Aug 2017) adding video clip
Last edited by WizardOfOdds on Thu Aug 03, 2017 8:55 am, edited 1 time in total.
WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

Browse Photobucket

Postby WizardOfOdds » Sat Apr 23, 2016 10:56 pm

Like to just browse pictures, try Photobucket. Here are some that I found interesting.
woodbox clamshell
Image

a fabric top A-frame
Image

a hi-lo vardo?
Image

VW style pop top on Honda Element
Image

mini-chuckwagon
Image

drop-floor camper
Image

hatch-foor clam-shell
Image

ZigZag truck top
Image
zig-zag tent top
Image
WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

Unusual Fiberglass PU Slide-in

Postby WizardOfOdds » Thu May 19, 2016 9:09 am

WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

DIY Tent Top Pop Up

Postby WizardOfOdds » Thu May 19, 2016 9:11 am

WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

Happy Camper concept...

Postby WizardOfOdds » Sat May 21, 2016 10:24 pm

WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

Car top with trailer top potential?

Postby WizardOfOdds » Sat May 21, 2016 10:36 pm

This car top pod folds down pretty flat, could the concept be of value for a trailer design?

Image
Image
Figure is from this web page

http://tventuring.com/trailerforum/thread-40-page-5.html
WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

Oldie but Goodie

Postby WizardOfOdds » Sat May 21, 2016 11:03 pm

Image
WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

Re: DIY Tent Top Pop Up

Postby TeriL » Sun May 22, 2016 1:46 am

WizardOfOdds wrote:DIY tent top pop up with lots of interesting ideas

Image

Image

info is here

http://www.trademe.co.nz/motors/caravans-motorhomes/caravans/up-to-12-ft/auction-1082527681.htm


I had similar thoughts for a flip out addition for the bed of my pickup before I bought a fiberglass shell. I really like the A-frame center poles so you don't have to wiggle around a single pole. A "gothic arch" frame would be better. The home built "stabilizers" are brilliant!

I think I was inspired by the early tent campers before they went to fore-aft flip out bed sections with a "hard shell" center section.
Image

-- Teri
Our reach should exceed our grasp or what is a heaven for? -- Marshall McLuhan
User avatar
TeriL
Teardrop Advisor
 
Posts: 88
Images: 17
Joined: Mon Apr 14, 2014 5:20 pm
Location: Central Texas
Top

Re: Unusual Designs Found on Internet

Postby WizardOfOdds » Mon May 23, 2016 10:08 pm

WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

Re: Unusual Designs Found on Internet

Postby WizardOfOdds » Mon May 23, 2016 10:43 pm

I really like the A-frame center poles so you don't have to wiggle around a single pole. ....
The home built "stabilizers" are brilliant!
:roll:

Yeah, and also his entry step stool & storage, as well as the folding bed supports, and more.

I think I was inspired by the early tent campers before they went to ...... a "hard shell" center section.


Me too! My first trailer was an Apache Buffalo with the all-rag-top center peak roof. Beds were fore & aft. Side entry door just forward of the center pole and wheel. One simple, but valuable feature: the roof over the beds extended beyond the bed edge, so rain off the top would drip off the edge rather than roll down the entire end window screen (very nice in a light rain) and the wall at the bed edge sloped up away from you in bed.

Wish I never let her go. :oops:

I only have one or two slides of It (predated electric pictures by about 3 decades); hope to find them sometime soon. Yeah, I might post them if they pan out, but it would really be for me to keep my memories alive.

Thanks for the comments.
WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

Re: Unusual Designs Found on Internet

Postby TeriL » Tue May 24, 2016 1:21 am

WizardOfOdds wrote:
Me too! My first trailer was an Apache Buffalo with the all-rag-top center peak roof. Beds were fore & aft. Side entry door just forward of the center pole and wheel. One simple, but valuable feature: the roof over the beds extended beyond the bed edge, so rain off the top would drip off the edge rather than roll down the entire end window screen (very nice in a light rain) and the wall at the bed edge sloped up away from you in bed.

Wish I never let her go. :oops:

I only have one or two slides of It (predated electric pictures by about 3 decades); hope to find them sometime soon. Yeah, I might post them if they pan out, but it would really be for me to keep my memories alive.

Thanks for the comments.


I hope you find those pre-digital slides.

How did the roof extend past the side "windows"? Flaps with a fiberglass pole to hold them out?

I had ideas to have center supports with a integral solid door (for entry) at the back and a solid front support. They would fold toward the center and the tent portion would have a "permanent" center ridge pole.

Here's a quick and dirty sketch:
Image
Sorry for the reverse order of erection. Setting it up might make you feel like Jonah inside the belly of the beast :D

I suppose someone could use this idea for a quick and dirty trailer build awaiting their dream build. The fabric could be just some of those ubiquitous silver tarps at Harbor Freight and other places. The flip out sections would need some supports.

Some of the inspiration was from a friend who made a crude "Conestoga" tent from a blue tarp in the back of his pickup. He used PVC pipe for the hoops. Sorry, I never took pictures.

-- Teri
Our reach should exceed our grasp or what is a heaven for? -- Marshall McLuhan
User avatar
TeriL
Teardrop Advisor
 
Posts: 88
Images: 17
Joined: Mon Apr 14, 2014 5:20 pm
Location: Central Texas
Top

Re: Unusual Designs Found on Internet

Postby WizardOfOdds » Wed May 25, 2016 10:43 pm

Here is a rough side view drawing of what I remember of my old 1964 Apache Buffalo.
The open length is 16 ft, closed 8 ft. As I recall the beds are about 20 inches above the floor. Notice that the roof over the beds extend beyond the bed edge, that is the edge supports for the tent top are not vertical at the bed edges. (Edit 5/26 - as opposed to the later solid state version in which the end panels had to slope slightly inward so the bed side panels could fold properly). The cental and intermediate support are vertical and the middle one is adjustable to take out the slack in the tent. (Edit 5/26 - on 2nd thought the intermediate supports may have tipped slightly away from center, I just don't remember.) It all worked extremely well.
Image
All the tent top supports were an inverted U shape. They, and the bed base supports, were all made of (what looked like) EMT (Electrical Metalic Tubing - or what we called Thin Wall Conduit). The bed supports and center top support had telescoping sections which were probably special diameters not readily available.
WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

Trailer from 2 platic water tanks?

Postby WizardOfOdds » Sat Jun 04, 2016 10:01 am

Make a trailer from 2 plastic water tanks?
Image
Image

Image
Yeah, it has a lot of issues to solve, and where do you get acceptable tanks?
Read all aboutit here...
http://www.gizmag.com/stereotank-taku-tanku-tiny-house/33393/?li_source=LI&li_medium=default-widget
WizardOfOdds: Chalet shaped rag roof clam shell TIER drop for 4 cylinder tow
Tip Top Tier Drop thread http://www.tnttt.com/viewtopic.php?f=5&t=56232
Unusual Designs thread http://www.tnttt.com/viewtopic.php?f=5&t=64495
Tale of 2 Trailers thread http://www.tnttt.com/viewtopic.php?f=35&t=61451
User avatar
WizardOfOdds
Teardrop Master
 
Posts: 276
Images: 43
Joined: Tue Jul 25, 2006 6:23 pm
Location: Virginia
Top

PreviousNext

Return to Non-traditional Designs

Who is online

Users browsing this forum: No registered users and 0 guests