Pictures are finally uploaded!
Passenger side rear:
Driver side rear:
Front:
We opted for an opening concession window on the driver side:
Here's what it looks like with all the modules out:
And we did a quick "let's put this back together different". It took about 5 minutes:
The sink module in the picture has a 5 gallon water tank, grey water exits through a hose in the back and we have a catch container for it. It used 12v power for the pump.
Currently storing it in our front lawn, because it makes a great front hang out spot. We have another trailer we're going to sell (Modified RPOD 182). This will fit into our garage -- if I didn't already have a project CJ-5 and my track toy Miata in there! Once the Jeep is back online I'm pretty sure I'll be able to fit all 3 in, but it's just so cool to have it out there as a hang-out that we'll likely leave it there.
There's 6 tie downs that link into the frame, and I can shove up to 2,400 lbs of stuff in it, so it's a great utility trailer too. Very spiffy overall.