Testing outlets I discovered voltage across the neutral to ground. Seems to be about 10v. I installed a PD4045 and grounded the ground buss to the trailer. All GFCI outlets are grounded to this bus bar. Otherwise, the everything is wired according to the instructions and based on all the information I have seen here. I do not have the battery connected yet so what I have read tells me I shouldn't see any power on the DC circuits. But the voltage on the neutral seems to be associated with the DC converter circuit. If I remove power to the converter (leaving the converter breaker off) there is no voltage across the neutral to ground.
So somehow the dc circuit is feeding voltage back onto the neutral it seems. Is this because the battery is not connected? Where should the DCcircuits have the black wires terminated?
I guess thats where I am at right now. Figured I would ask here since I won't see an electrician for a little while and this converter is adding a layer of complexity that seems to be confusing me a bit.