Need help on next steps.
Outer walls are up and beginning to put the studs in. One side is complete but when I began cutting studs for other wall, I began to realize that the stud measurements were longer.
Sure enough I measured the height of each wall and they are 1/2 inch off. 45 1/2 inch compared to 46 inches. It is a 5x8 ft trailer with Rimple design.
Choices I see:
1. Since it is a 5x8. 1/2 inch difference with 5ft to play with will not be an issue.
2. Take down taller wall and sand glue off and glue and screw wall closer to 45 1/2.
3. Insert 1/2 shims where needed. (Thinking that the 1/2inch will show more on hatch.)
Or, chill. Newbie with first large mistake and I am over reacting.
Thanks,
Mike