Thanks, Steve. I was gonna ask about the glass and corrugated tin in your picture, but buzzed through your build thread instead.
Fold up tables... Awesome!
You're an artist. I'm good with my hands, but usually lack that creative vision.
Love the Steampunk stuff.
Mechanicals are beautiful, Man!
Well, I didn't start insulating today, but I did get a few odds and ends done.
I finished gluing the skin to the framing at the AC vent openings. I actually mounted my PVC box first, to give me a nice flat surface to clamp to.
I also riveted a disk of aluminum over the factory installed "out" vent at the rear passenger side.
I'm going to rig up a blast gate so I can close off the front, "in" vent while traveling. It will have a fan, and will be my bathroom exhaust.
I need to get some touch- up paint... I got in a hurry yesterday, and didn't realize I'd missed applying one strip of masking tape when doing my cut-outs.
My jigsaw shoe made a nice scratch where things weren't protected... UGH!!!
I'm sure it'll get scratches from tree branches and stuff, eventually, but not already!
...
I'm not going outside until the temperature is above my age.