GTS225 wrote:
Buba1; You're going to have a hard time with this, as a folding system is going to be less stable and "weatherproof", when set up, than a glued-up shell. Additionally, it's going to take two guys to stand it up and let it down from the garage wall for use, as the finished weight will be ore than one should/can handle.
Further, if you're looking for a 7' width in the enclosure, with the wheels outside, then you're looking at a vertical height greater than 8', which is the typical height of a single-stall garage. This suggests that you're only choice is a wheels under configuration.
Sorry, but I have no experience with pup-up frame weights, so couldn't venture to even hazard a guess in that regard.
Roger
I agree; but it's not impossible, as long as he has a second person and a way to keep it from falling down, on top of him or his vehicle. Also, any pop-up frame can weigh differently than another, depending not only on the make but also any modifications that have been done to the wheels, tires, axle, etc.
Buba1: If you decide to buy the pop-up, you could pull off the walls and roof, maybe leaving the deck, and go get it weighed. If you decide not to continue with the project for whatever reason, there is a huge market for flat-bed trailers and you could probably make your money back plus some.