by Forrest747 » Fri Jun 11, 2010 12:25 am
Moved the pump yesterday. took pictures, but havent downloaded them yet. I also secured the 1-1/4 vent line and connected the water tank to the water pump. need to get some more hose to run the line from the water pump to the faucet. No rush.
Also had a issue today in dry fitting the door hinges while i know its 5/16-18 bolt and the t-nut is the same its not matching up. Thinking I am going to have to enlarge the hole to be able to tilt the bolt around so it will line just the right way.
Tonight I also ordered my fiberglass tape, CPES along with the fill-it and what they recommend to do the fiberglass. I also ordered som t-nuts since I am getting sick and tired of not having them at the hardware store. Plus it was cheaper this way.
I have an extra queen size mattress that i was just going to sell, but it is big enough to fit into Charley. However if I do I will lose my lower cabinets, not sure I am willing to do that. We shall see.