by Bandit » Wed Feb 08, 2006 8:48 am
I am looking for a side cranking jack, like this, except that I want it removeable like the ones that slide on to the round tubing attached to the side of a tear and secured with a pin.
My thoughts are to have a round mount welded to each corner, then raise the back and place on blocks, then move to the front and attach and use to level the tear. Now it is off the tires and stable.
Has anyone done this?
I also like the idea of using the Neon jacks (TOM?) welded to the back and then the crank jacks for the front.
First Metal Cut 02/11/06
Complete! (Almost) 08/22/06
Looking for a trip in the SPRING!!!!
Not Up to Testing the Heater!!!
Thanks for all the HELP!!!!