I have gotten quite a bit done the last few weeks but havn't had time to post any pic's.
I srayed and sanded the exterior with 6 coats spar polyurathane.
Got the fenders painted and mounted,Model A tail lights mounted and wired.
Water heater installed along with all the plumbing work.
Installed the rock gaurds and all the exterior edge trim.
Installed all the interior and the exterior porch lights.
Installed the Am Fm mp3 cd stereo and speakers
Installed the battery and wiring to it.
so much done but alot to do yet.I really hoped to use it at least once this year but I'm not sure I will beat the cold.
Head board cabinet installed
Stereo installed
Fantasic Fan installed
I'm not sure if anybody else dose this,but I used some aluminum tape with a sticky butyl backing on all my corners and joint ie. rock gaurd etc.I get it when I buy windows from Pella but Lowes has it with out the logo and in smaller rolls
Fenders and tail lights installed
Rear rock gaurd and moldings installed
Front rock gaurd,battery deck and battery installed
I had to temporary a door mounting to see how it looked.The next project is getting the doors mounted and some trim for the windows fabicated and finished.
OH! and since I didn't have enough to do already I found this on craigs list for cheap 13 1/2 '.My next build will probally be a TT so I"ll have a good frame with electric brakes,windows,water and holding tanks,some appliances (frige is shot)and whatever else I can salvage.I thought about rebuilding but the ceiling.floor and corners have extensive water damage.I couldn't even buy an axel and springs much less the steel for a frame for what I paid for it.