You ever have those nights where it seems like you get nothing accomplished? Tonight WASN'T
one of those nights!
Got the rest of the LED's wired up!!
Started in the galley. The galley has two sets of lights. One set is controlled by a toggle switch in the galley. The other set is controlled remotely from my key fob.
The pair of LED pods that is controlled with the toggle switch are tucked up in the small storage shelf. The remote controlled lights are under that shelf.
Storage shelf door closed...
Storage shelf door open....
A shot of the under-shelf lights...
Once those were finished I moved my efforts to the interior cabin lights which are just 4 small warm-white LED pods mounted to the cross spars. I drilled some small holes diagonally from where the LED is mounted, through to the back edge of the spars to act as short wire chases and give it a cleaner look. Convertible remember? No roof skin to hide the wiring.
And finally for this evening, I finalized the side "porch lights." Each side light has 3 RGB LED waterproof pucks mounted to them. Then they get attached to the side using long screws and aluminum spacers.
The color of the side lights is controlled using 3 dials, and can be changed to whatever color blend I want.
Oh, and of course the little key fob remote toggles the interior cabin lights on and off, as well as the on/off function of the side porch lights. And the RGB LED strips.