I got my 3 way rear view camera installed. Being new to a trailer this big as well as the gooseneck, these should make it a little easier to backup.
I also started measuring the tie down locations for carrying two atv’s with one on a trailer. This way we can disconnect the truck and throw one in the bed and the other on the trailer. Unfortunately we do not have much in the way of riding from the campground up here in New England.
The rear dinette seat was boxed off for stronger rear back. I decided to cut it out a bit to hold books and magazines.
Not sure which board I saw it on, but they had a cool setup to swing the tool box from inside the trailer to outside. I started working on this as well.