The Finley T1 -Update 8/26/14- All done!!!!

[finleycraft]

This has been one crazy long week and very little time has gone into the trailer. I wont bore you all with the details of the week. I decided to take the hubs apart to repack the bearings. I was going to rehab the springs as well but the bolt on one set of springs was too rusted so down to northern tool I went to replace the springs. I replaced the U bolts at the same time. Hopefully I'll get more done this week. Maybe get the bottom finished and bolted down

[finleycraft]

Got the floor all built and attached sanded it down and filled in any defects.

[crumbruiser]

Good job!
Frank

[finleycraft]

Got the wheel wells all done and installed and got the sides cutout and ready for the spars. Gonna be a benroy back curve

[DudKC]

Looks awesome! You're flying right along!

[finleycraft]

Looks awesome! You're flying right along!

Thank you sir! Hopefully I get more time to work on it next week, I went camping last weekend and didn't do anything so I am itching to get some building done.

[campmaster-k]

Keep up the good work.

[finleycraft]

Keep up the good work.

Thanks dude.

I did a little work last night on the front radiuses.

[finleycraft]

Worked for a couple hours this evening after work and got half of the front skinned up. The side isnt yet attached but I had to put it up again to see what it is going to look like. Gonna put a 15x24" window on both the front and the driver side. I only want one door and it will be on the passenger side. I am going to try to get some more done tomorrow after work since I have plans all weekend.

[aggie79]

I really like the design of your teardrop! Those front curves are cool.

You're making really nice progress.

[Darren]

Lookin good.

[finleycraft]

:thumbsup:

I really like the design of your teardrop! Those front curves are cool.

You're making really nice progress.

Lookin good.

Thanks guys! I kinda stole the base design from Campinn 560 ultra. I did ask permission first I really am having fun with this build but last night the damn cicadas were deafening. My ears were hurting by the end of the evening.

[finleycraft]

Got the front curve up. And got some stuff coming in this week from amazon. Combine that with nice weather this weekend and hopefully I'll get lots done

[High Desert]

Very cool look! Gonna be a sharp one me thinks

[finleycraft]

Very cool look! Gonna be a sharp one me thinks

Thank you sir! I hope it turns out like I hope.

I got 16 ft of LEDs today its gonna be stylin with indirect LEDs!