Battery box vented

Battery box vented


Tue Nov 08, 2011 7:18 pm
4060

EXIF-Data

Fri Sep 16, 2011 4:13 pm
5.8 mm
1/125 Sec
F/2.8
80
Manual
Flash did not fire, auto mode
0 EV
Center-weighted average
User avatar
jonw
Titanium Donating Member
 
Posts: 525
Images: 163
Joined: Thu Oct 22, 2009 6:22 pm
Location: Marlboro, Mass.

Image Description

After much searching, used a piece of vacumn hose (from Home Depot) taped to two 90 degree PVC elbows so I could run the hose on the rear "joist" so it would not interfere with using the area in front of it for storage. Although duct taped in this picture, I later replaced the tape with two cable ties before putting on the aluminum skin.

Return to jonw