(0148) I added pieces of 2x3s in the center to connect the cross members together. I placed two screws on the bottom side of the frame and flipped it
(0175) For the floor, I used 1/2" thick marine grade plywood that I attached to the wooden frame with PL construction adhesive and screwed it eve
(0154) Here we go, after three coats of Cabot marine spar varnish. Isn't that a nice color? It looks like I dipped it in honey.
(0149) This is the finished wooden frame. I notched out where it will interfere with the bolts on top of the HF frame. This way it will sit flush on t
(0148) I added pieces of 2x3s in the center to connect the cross members together. I placed two screws on the bottom side of the frame and flipped it
(0147) I placed a 4x8 sheet of plywood on the trailer to have a flat surface to build the wooden frame. I taped waxed paper on the plywood so the Gori
(0146) Lay out for the deck. I used kiln dried 2x3s for the floor frame.
(0145) You can see the steel cross member I installed in the center position. The Kuffel Creek plans wanted me to use a wooden 2x4, NOT!!
down under tech

(0148) I added pieces of 2x3s in the center to connect the cross members together. I placed two screws on the bottom side of the frame and flipped it

There are no comments to display.

Photo information

Category
TnTTT Members Gallery
Album
down under tech
Added by
down under tech
Date added
View count
1,628
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom