installing

I have a thor magnitude xg32 2022. i want to be install a receptacle in one of the storage compartments on the rv. The dealer will not do any modifications before i get started I would like to know which compartment would be the best. I plan on running a small freezer while i am driving,shore...

Has anyone installed a roof rack/luggage rack on their Sunseeker? Is there even one made for it? Thanks

Ok.. Haven't had to replace yet... Guessing not big deal, but now leaking.. so off to Globe, AZ tomorrow... any hints suggestions for us.... for installation??? thx!

Has anyone installed the integrated camera system from Ford? I have a 2024 F350 and 2023 Solitude 346 FLS. I'm just not sure if this type of project is difficult and very involved or can it be more of a DIY installation. I also have the TPMS from Ford and it looks like it uses the same...

Afternoon all. Been in on-going discussions with one of the battleborn support folks in planning to install a victron 12-12-30 isolated dc to dc charger in my 2021 GT25FB. While I have the process figured out (wiring, fuses, Anderson Connectors) the two things I am still pondering are the...

I have a 2023 thor kw29 quantum and i bought it with 4200 miles on it. And i was wondering if anyone new of a shop that would install a set of power entry stairs. Mine did not come with any from the factory

Does anyone have a recommendation for a replacement window, that opens, for the window over the bed in a 2024 New Aire? My wife would like to get more airflow in the bedroom. I found the manufacturer of the OEM window on Newgle and they do custom windows -- but custom for OEMs, so they want to...

Hi, I am looking to install the Sumo springs (front) on my 2021 Ford E350 chassis - Four Winds. I tried to place the RV on a ramp but there isn't a lot of space to place the springs. I have ordered a 6ton bottle jack in the hopes it can lift up one side of the RV at a time so that I can...

I'm in process of a pretty extensive Fiber Stream renovation at the moment and have a few questions for the group. I'm into the phase of replacing the floor. The original floor was 1/2" plywood. It had rotted and was extremely "bouncy". I'm replacing it with 3/4" Coosa board. I've already...

I installed a Victron BMV-712 a while back and wanted to share one tidbit of info that might help someone along the way. Our batteries are located in the typical spot under the bench seat, passenger side. I've saw several install the display unit on the front side of the bench seat kick-panel...

I am planning to install a "Extend-a-Stay" fitting between the ASME tank and the regulator on my motorhome. However, the coach's main propane hose from the regulator to the coach appliances has no give, and there's no way I can move it 5" further from the tank in order to install the fitting. My...

Hello everyone! I recently purchased a 2021TB Winnie Minnie TT and quickly realized having a backup camera is needed LOL. I can order a camera from GMC accessories, but the instructions require centering it on the back/rear exterior wall from side to side and top to bottom, and drilling through...

Hi all I have a 2012 Wardrobe Model. My sink is above my microwave. I want to replace the old POS with a new air fryer comboe becailuse the buttons are dying out. I searched the forums here and didn't see anything. Just wondering if anyone had done this.

We have decided to install a removable table between the two front captains chairs in our RV. I decided that I needed to remove the engine cover so I could get a look at the floor in the area where I plan to drill a hole for the table base, since the base will be flat with the floor...

I am in the process of installing a set of Rec-Pro recliners in my 2019 Greyhawk MV. I will be replacing the sofa fold out bed. There is only 60" of space between the dinette and the wall slide. Rec-Pro only offers one recliner that fits this space. Has anyone installed a recliner such as this...

Hi, I am trying to find out where I can buy the laguna tables you see that come with the theater seating. They go right in the cup holders? I hate to operate the slide just for the able legs. Thanks Curt

I wasn't expecting awesome with my Cargo Mate, and I guess that's a good thing. Question for those of you who have installed rear windows in one: My rear barn doors are all wood, mostly 1x3 and 1x4, except for the outer skin. Literally 1x3 and a sheet of expanded polystyrene. I'm thinking of...

Hey guys! Need some help if anyone knows. I bought a Hughes Power Watchdog for my brand new 2026 Rockwood but I have no idea where I can access the main power cable. On this configuration the 50AMP circuit is in the back of the trailer but the passthrough storage area is at the front. I know...

I've got an 05 Atrium limited edition and I'm wondering if anyone has moved to mini splints yet and if so we're did they intall their condenser unit outside.

First time owner, I would like to replace the flat mirror in the bathroom with a small medicine cabinet as well as install a small shelf on the wall. Are there any sort of studs in camper walls like in homes or what is the method of attaching semi permanent modifications like these? Thank you.

If you really want to you can read through this thread regarding my upgrading my coach to 50A service : Thinking of adding AC unit I completed this job several years back and adding the AC unit got delayed. My Storm only came with one AC and so I have just purchased a new 13.5k GE unit and am...

I own a 2023 jayco 34 ft white hawk and I want to install a rear class 3 trailer hitch for a bike rack ,if anyone has done this please send me the instructions thanks Don.

Is there any reason, like safety, fire, chemically etc that LiFePo4 batteries can't be installed in the interior space (under the bed) as opposed to the existing LA battery tray with outside door? I was sketching up my planned switchover and it occurred to me that it would be easier to put the...

Thought I would share my little modification: I am in the process of adding a front facing camera to my 2017 Cornerstone with the Xite radio. I find the blind spot in front of our coaches rather stressful when maneuvering in or out of tights areas. Things I have discovered: First, our...

I installed a ScanGauge II on my Winnebago Brave built on the Ford F53 chassis, plugged directly into the OBD-II diagnostic connector under the dash. It took only a few minutes to connect and mount, and it’s been immediately useful. For those unfamiliar, the ScanGauge II gives you real-time...