Foamie solar panel cover

Ratkity

Senior Member
Joined
May 26, 2010
Posts
1,065
My 85watt solar panel is here! It's a good thing I waited before cutting anything until it arrived as I had written down the wrong measurements. I had looked at so many panels, there's no wonder I got the wrong numbers down.

So why a cover? This is for only when driving. I have a 2009 Reverse TD from Little Guy and the solar panel is going on the front slope of the TD. This is an area where road debris could possibly hit the panel and panels don't do well with dings. It can handle 50 mph hail, but probably not my warp speed down the highway.

Since helping eagle with the numero uno Foamie TD, I know how strong, yet flexible cloth or canvas covered foam can be.
 
Materials:

Titebond III

Pink 1" foam board (my box store didn't have the blue) - Worked out great because this is 24" x 8 ft and $9.38

image.php


Hot Chili Pepper cloth
image.php


Buckles and straps

image.php


Oh! and the solar panel - 85 watts 45" x 20" from ul solar

image.php
 
So um, despite being very scientific and being able to draw a straight line, apparently, no matter what tool I use, I can't cut straight! LOL.

No worries. I have a little hand sander that will smooth out the imperfections, and as eagle and I found out, the cloth will hide a myriad of mistakes!

Note the blue painter's tape. My auntie has stock in 3M and I have gotten a free roll of that stuff for the past 6-7 yrs. I use it for lots of things!

image.php


So, it's in the basement, drying - slowly drying.

I was worried the combo of pink background and titebond would discolor my fabulous pepper fabric, so rummaged around in my cloth scraps and found some white cloth to use as an initial covering. I also found some old soft upholstery fabric I can cover the inside of the foam cover with (the rose colored stuff in the upper panel).
 
Using Titebond III - if I'm not happy with it, I have the old GG standby.

Hugs,
Ratkity
 
That's going to be One DELUXE Solar cover !!! :thumbsup: 8) :D
If the T3 ever dries ... inside that non porous foam ... :o tried it , never worked for me ... the outside was dry , buy weeks later the inside still had wet glue ... the reason I used GG now for foam to foam :roll:
 
GPW":3ik3dyo7 said:
That's going to be One DELUXE Solar cover !!! :thumbsup: 8) :D
If the T3 ever dries ... inside that non porous foam ... :o tried it , never worked for me ... the outside was dry , buy weeks later the inside still had wet glue ... the reason I used GG now for foam to foam :roll:

GPW, the T3 was taking too long to dry, so I switched to some multi-purpose Gorilla Glue. It is setting now.

I *cough* *choke* sanded the top and edges *bats at flying pink dust*.

I was going to cut the white duck cloth I had hanging around and didn't have to - it was like it was MADE for this application. I think that stuff has been hanging around in my scrap box for 15 yrs. There are some spots on it and a run.. yay for thriftiness!

*stops and blows a few pink boogies*

Hugs,
Ratkity
 
A simple dust mask might be a really Good idea when sanding this stuff... :thinking:
 
Rounded edges


image.php


image.php



First coat of glue

image.php



First cloth layer:

image.php



Bottom showing first cloth layer:
image.php



Top showing first cloth layer:

image.php
:roll:
 
looking good. can't wait to see the finished product. don't forget vinegar is good for removing glue in the hair. :lol:
 
eaglesdare":yww8c9h3 said:
looking good. can't wait to see the finished product. don't forget vinegar is good for removing glue in the hair. :lol:


:lol: :lol: No upside down gluing on this panel! *phew*

Hugs,
Patricia
 
More progress!

This is my scrap upholstery cloth being fitted. It doesn't reach the sides, but that's ok since the duck cloth is there. There will be white showing on the long edges. It's a very soft and thick fabric, and I thought it would protect the solar panel from scratches from the foam or glue leftover inside the cover.

image.php


Fitting the pepper cloth:

image.php


image.php



Second gluing!! This was spread out in a fairly even coat of thick glue using a stiff foam roller (seen in one of the first picts). The small size of it was great for getting into corners and doing the edges.

image.php


Pepper cloth stretched tight over the glue!

image.php


Figure out the corners. Eagle had a time with corners on her doors, so I made sure I left a lot of room in the dimensions to allow for a bulky inside corner. I glued the corners down like wrapping paper.
image.php


image.php



Letting the glue dry:

image.php


image.php
 
Next steps:

Continue peeling T3 off my fingers :lol:

Dilute T3 (1:1) and cover top and edges

Figure out how to put straps on - was thinking of getting a small strip of cloth and T3ing the ends and sliding the strap through that. I might delay doing this until the panel is mounted so I can see the best placement of the straps.

Already made the adapter pigtail for the new connectors on the solar panel to the solar controller. Will test tomorrow between rain storms.

Already took out the non-functioning radio antenna from the TD and sealed it up (where the panel is going).

Bought stainless steel screws for attaching brackets to the TD (expensive!)

Drill holes for brackets in panel.

Mount and adhere brackets to TD.

Mount solar panel

Approximate costs:

Solar panel - $220
Brackets (4) $5 - for mounting panel to TD
Screws, stainless $15 - for mounting panel to TD


1" foam $9.75
16 oz Titebond 3 (x2) $15
2 yds pepper cloth $15
Straps and buckles $15
Duck cloth - scrap
Upholstery cloth - scrap
Gorilla glue - small bottle that was hanging around from another project



Hugs,
Ratkity

edited to separate panel and cover costs!
 
That is without a doubt , the BEST solar cover I've EVER seen ...... :thumbsup: 8) :thumbsup: :applause:

First one I've ever seen ... :roll:

No kidding , I think it's Cool and Functional ... Nice!!!! 8) :thumbsup:
 
Thank you!! :) :)

I shall post final picts when the panel is mounted some time next week.

Supposed to rain all weekend in MD.. bleh.

Hugs,
Ratkity
 
That's the rain that came through here today ... we just got the quick bottom end of it this morning .... so far ... :roll:
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom