High Desert of eastern NM

[Centerlane]

So, I've tired of tenting and have decided to build a TD.

My hats of to those of you that build in small garages, or no garage at all.

I've been in construction most of my life, have a large shop, a lot of tools
and it should be a quick easy build So I thought

If I can learn how to post pictures, I have a few.

EDIT: FIRST PICTURE WAS TAKEN 12-01-19

 

[kscmpr54-TNT]

Welcome to the forum. Looking forward to your pictures. Best wishes on your build.


Sent from my iPhone using Tapatalk

 

[pchast]

Welcome.

 

[noseoil]

Where are you? We're in Raton...

Just go to your profile & start adding images, from your computer into a gallery. Once they're in your gallery, you can click on them individually, swipe across the link that opes (I use the center one) & copy it into your post thread. It's easy to use, you just can't upload directly to your thread from the computer, it's an extra step to set up the gallery. I usually open two versions of the TNTTT in the browser, so you can go back & forth between them when posting images. Hope this helps.

 

[Centerlane]

Soo, one day when I discover how to add photos, I will.
It is to be a Benroy type, the " box" 54" H X 57" W X 120" long.
I didn't want a wide track, it's already gona be 3" wider than most mid-size vehicles.
I wanted the height , because ,I want a real bed, if you call a fullsize mattress a real bed.
2-challenger doors they are lotsa$$$

Nose, I"m in Clovis ,the side no one comes to, but every one wants to leave..

The Whittington center is on the list, probably one of the safest places on earth, unless you've a big mouth.

Been there a number of times.

Maybe I'll learn up the pictures mannana.

Stay safe and stay in the shop

 

[Centerlane]

gallery/image.php?album_id=5081&image_id=161604

1/4" spline

 

[Centerlane]

gallery/image.php?album_id=5081&image_id=161603

3/4" cdx

EDIT:THIS FIRST PICTURE WAS TAKEN 12-01-19
and I have tried to edit the url. to no avail.

I'm obviously not in IT.

 

[Centerlane]

Big'ens out of little ones.

 

[Centerlane]

press

 

[Centerlane]

radi jig

 

[Centerlane]

No pict. but i cut the inter panel, using a bearing bit, then a 3/16" straight bit using a fence, saving the2" strip to use later in-between the spars

 

[Centerlane]

 

[Centerlane]

Floor 3/4" poplar frame
1/8" bb bottom
1/4" bb top, inset 7/8" to create rabbet
3/4" eps center

 

[Centerlane]

]

Fully adhered TPO roofing material, with contact cement.
It did add 15#

 

[Centerlane]

]

Interior, no stain.

 

[Centerlane]

Lin'em up, to spray

edit; picture dated 12-20-19

 

[Centerlane]

Stack'em up.
Seems like I used a slow setting glue at the joints.

Pocket screws and screws from the bottom, 16" oc.

 

[Centerlane]

 

[Centerlane]

 

[Centerlane]

Hatch area was amazingly square, within 1/32"

12-28-19