Offroad Pop-up

[Lambo]

"Pulchritudinous"

 

[Dusty82]

Bouncing off of Woodstramp's idea, how about the Faraday Cage?

 

[BC Dave]

waow! ... Great job sir;I take my hat off to the in design; inginuity and workmanship.

what does she weight in at?

names; 'stump jumper' comes to mind ... "sleeper peeper" (ie lookout with the kids in it ...) ... rock hopper ... i done know ... just a couple that come to mind immediatly ...

 

[Ron Dickey]

you titled it help me find a name.

Did you come up with one?

Not knowing you or your surroundings I can only come up with words that describe where you live or words that you might know.

But to tell you the truth the ones who will name it best might just be your kids. My brother in law years ago bought a Saab and asked the kid to put the name on the plate. It reads webnsabin! kids often come up with the simplist of puns

Words I come up with
first is a political protest .... UN-C'mon
UN-C'mon Highlander

Moose on the Loose
Tall tear
4x4 rise and fall
Canadian outback
saskatchewan
Windigo Lodge
Range Rover

 

[nissan300z90]

Up North would be a fitting name.

 

[rowerwet]

late I'm sure, but how about tree fort (the top part)
anything new on the build or use pics?

 

[Martiangod]

Awesome build....

How bout

" AlooniBin "
Pronounced like Aluminum

 

[asorensen]

Its been a few years since I've perused this forum! When I did I realized I had never really updated this post. I thought I would share a few pictures and latest status of the trailer I built.

I have worked on a few things like steps/nerf bars around the outside:

Even in the rear which has proved to be very convenient:

I added some items to the front also. I have found a nice 10lb propane bottle. A nice marine BBQ. A battery box and an additional piggybacked box which holds my four camp chairs:

Here are a few more pictures of the camper in action with the top popped:

I also got a new tow vehicle which I may or may not have gotten to specifically color match the trailer

 

[aggie79-HILO]

Simply "wonderful". Thanks for the update.


Sent from my iPhone using Tapatalk

 

[flboy]

Wow! Awesome craftsmanship!

I am not getting how the pop up works from the photos. How does the roof itself get raised?

 

[mandymurrin]

So what did you name it?

Sent from my SM-G920W8 using Tapatalk

 

[asorensen]

Thanks for the comments.

Post by mandymurrin » Thu Apr 28, 2016 6:49 pm

So what did you name it?

To be honest my kids and I tried- out a few names and nothing seemed to fit or stick for us. We simply refer to it as the "trailer" not very creative but initially i had some intention of creating some logo/art work but have decided against it for the moment.

by flboy » Thu Apr 28, 2016 5:48 pm
I am not getting how the pop up works from the photos. How does the roof itself get raised?

The roof is actually only a cap that is fairly light weight. The process is fairly easy: I unlatch it and lift one end of the roof up, usually the rear, the wall is pivoted up to hold the roof up. I then go to the front and lift the roof and wall in the same manner. Finally I go inside the trailer pivot the side walls up and latch it all to hold its shape. The roof rack bars help to ensure it doesn't collapse before i have the side walls in place.

I am planning to add some solar to the roof in the near future which will mean that lifting wont be a easy. My plan is to add lifting shocks to the sides much like this:

What I haven't been able to work out is the racking effect as I undo the four corner latches and I am left with just one holding in a single corner.
I am open to others thoughts or comments on this!

 

[Louisd75]

I am planning to add some solar to the roof in the near future which will mean that lifting wont be a easy. My plan is to add lifting shocks to the sides much like this:

What I haven't been able to work out is the racking effect as I undo the four corner latches and I am left with just one holding in a single corner.
I am open to others thoughts or comments on this!

I think there are two ways that would prevent racking. You can mount the gas strut in a way so that it passes through it's shortest point and then begins to lengthen again prior to closing completely. For example, using the forward strut on the camper pictured, mount the forward part of the strut (on the body of the camper) so that it sits higher than the aft part of the strut (connected to the lid) when the lid is stowed. A friend's Sportsmobile is set up similar. He releases all of the latches first. The roof stays down until he pushes up on one of the ends from the inside.

The other option is go go with a beefy middle latch (there are three per side in your picture) and release it last. The lid will still want to rack from side to side, but you'd avoid all the stress on one corner.

 

[SuperiorBound]

I often wonder how people are enjoying their homebuilt and how they are holding up. Thank you for the update.

 

[HardlyLurking]

I had a strange idea, have the cylinder of the gas struts rest in broom holder clips, so you have to bump it out to get it up... and possibly swing on a pull handle to get it latched.

 

[asorensen]

Here is a picture of my kitchen area I took while camping this weekend. May long in Canada eh! Yes those are peanut butter chocolate chip cookies in the oven! The frame in the middle is a pass through to table level inside.

I haven't done anything yet with the gas shocks for lifting the roof but I appreciate the responses. I think I like the thought of the shocks set up in a way that they move past there longest point. The was explained in I much clearer manner by loius75.

 

[saltywalty18]

Here is a picture of my kitchen area I took while camping this weekend. May long in Canada eh! Yes those are peanut butter chocolate chip cookies in the oven! The frame in the middle is a pass through to table level inside.

I haven't done anything yet with the gas shocks for lifting the roof but I appreciate the responses. I think I like the thought of the shocks set up in a way that they move past there longest point. The was explained in I much clearer manner by loius75.

So what did you do with the gas struts on your build? How did you attach?

 

[saltywalty18]

I too built something similar. What did you use on the corners at the top to keep water out? How did you attach?

 

[asorensen]

Finally getting around to posting the roof being raised![youtube]NE6PK7h2OOk[/youtube]

The end walls are attached to the roof and run on bronze bushings through a channel cut in the side of the roof cap. This is protected by a strip of rubber gasket (bicycle inner tube).

 

[greygoos]

Beautiful build and a great craftsman.