Teardrops n Tiny Travel Trailers

Tear Drop Project for sale



Custom built frame made from 2”x 2” x 1/8 “steel with 2” receiver on rear for bike rack
Custom built flexride axle with 5 bolt hubs and mounts for electric brakes and splined shaft for adjustable start angle
2 custom aluminum mag trailer wheels
2 radial tires
2” ball tongue
Bull dog jack with detachable pad and wheel
2 Atwood stabilizer jack
2 Amber LED marker lamps with SS Bezel
2 Red LED marker lamps with SS Bezel
2 oval red led turn / tail light
2 rectangular sliding windows with screens
2 round lights for mounting by the door
1 ss 30 amp 125 Volt boat power connector
7 lead RV plug with junction box mounted on frame
Wiring for trailer lights
3 100 foot rolls of 12 gauge primary wire colors R,G,B
JVC CD player
50 Foot of speaker wire
White Formica countertop
Floor is poplar and #1 pine biscuit joint construction with ¾ foam insulations and Baltic birch plywood
Walls are poplar/ #1 pine with oak around door frame ready for insulation

Floor and walls are epoxy glued and sealed
Frame has been etched and coated with POR 15 paint

I also have a little epoxy left over that will go with it and also a sheet of insulation and 2 pieces of 1/8” and 1 piece of ½” Baltic birch plywood

View pictures in d-hartman Gallery


Don
I am located in cincinnati ohio

Nice looking tear! I'm Not interested, but for someone who is, What is the PRICE????

Toypusher thanks for asking.

I am wanting $1800 Dollars for it. I cound work somthing out with meeting someone within a reasonable distance for delivery.This would be a great tear for someone to customize to there needs.I am not finishing it because I have to many projects started and need to clear
out some space.


Thanks for looking
Don

Don,

Sorry, I should have thought of this too, earlier. What are the overall demensions? Length, width, height???

Seems like a pretty good price!!

Look at my pictures and you can see what is included. The size of the trailer is interior is approx 60"width and the length is 10' long over the elipse. If you have further questions on the size I can try to clear that up more. This is not build on a Harbor Freight or Tractor Supply frame. It was custom constructed 2 x 2 x 8 inch tube with a flexride torsion spring axle. The wheels are upper end aluminum and new radial tires. The bottom has been framed and all joints are of biscuit joint construction with 3/4 foam insulation. Both sides are double coated in epoxy.The side walls are are of the same biscuit construction ready for installation and the interior paneling. The sides are clamped on and ready for your full customization.The tear needs roof installation and any cabnetry you are interested in .I have have the counter top for the kitchen area.I was planning on making mine like http://westhoffdesign.com/michael/teardrop.htm
so in all it needs roof/galley/wiring/hatch i have a few pieces or baltic birch that is for the interior wall and the interior sides

There is a good local source for additional baltic birch. If you are interested in the trailer we could make arrangements to get any additional baltic birch for you.

Please respond with any more questions or offers.

Don

In other words by looking at your pictures. You've got the frame built and the floor installed. And both sides and doors cut with one side just clamped to the floor so it looks like there's little left to do. Just add cabinets. In all actuality there is a lot left to do for $1800. Oh, and all the accessories as shown in your album are included, right?

tact /takt/ –noun
1. a keen sense of what to say or do to avoid giving offense; skill in dealing with difficult or delicate situations.
2. a keen sense of what is appropriate, tasteful, or aesthetically pleasing; taste; discrimination.


Mike

IMHO I think the price is very fair. With what you get and the time spent you would spend the same thing starting from scratch and getting the to the same point. The work and the accesories look to be of high quality.
And the profile is very nice.
This would be a very good start for somebody.
Custom trailer with flexride axle,POR 15 and setup for electric brakes.
Aluminum wheels and tires.
Stereo
Counter top
All lights.
All the wire.
Floor built and insulated
Sides built and epoxied.
Sabilizer jacks
Windows

Geepers I wish I was just a little closer to Ohio..


Classic Finn

Yes Gage
The sides are framed and done but it needs the roof. I get the feeling that you feel that is a little steep. I haven't even gotten an offers from you. You are just window shopping, I guess . A flexride axle alone is about $375, add wheels, tires and dont forget hitch, etc.... I'm not making much, if any. for my time on this. Materials alone would cost 1800. Accessories are included.


Don

Don,

I think it's a good price and wish I could get it. Just short on the $$ these days.

d-hartman wrote:Yes Gage
The sides are framed and done but it needs the roof. I get the feeling that you feel that is a little steep. I haven't even gotten an offers from you. You are just window shopping, I guess . A flexride axle alone is about $375, add wheels, tires and dont forget hitch, etc.... I'm not making much, if any. for my time on this. Materials alone would cost 1800. Accessories are included.


Don

Don that is a very nice profile and extras that you have with it. I took a closer look in your gallery as well.. Saw nice close up of the tires and wheels.

Id say for sure that is a fair price.. it all adds up as Sonetpro says also.

Sad to see your parting with it after such a great start.

Classic Finn

d-hartman wrote:Yes Gage
The sides are framed and done but it needs the roof. I get the feeling that you feel that is a little steep. I haven't even gotten an offers from you. You are just window shopping, I guess . A flexride axle alone is about $375, add wheels, tires and dont forget hitch, etc.... I'm not making much, if any. for my time on this. Materials alone would cost 1800. Accessories are included.
Don

Don, between you and me. If you were closer to California, I'd be jumping all over it. As you might know I'm getting ready to build one for my sister and beings how I've got over $5000 in my own build, I know what it takes to build a quality 5x10 teardrop. And NO, I am not shooting yours down, just trying to get a good picture as to what all is actually left to be done and what the total expense would be for me to come get it. I agree with Kerry in the fact that it is a good deal for someone who lives closer. Good luck with your sale.

And Mike, mind your own damn business.

I have decided to lower my price on the above trailer to $1400 any interest please email me .

Thanks Don