Page 1 of 2
delete

Posted:
Sun Jun 01, 2008 9:21 pm
by dsmith6
delete please
Re: Weekender for sale in wilmington NC

Posted:
Sun Jun 01, 2008 9:28 pm
by elmo
second picture....good luck with the sale!!

What size and brand of trailer(?)

Posted:
Sun Jun 01, 2008 9:54 pm
by Alfred
Hi!
What size trailer is that? What are the dimensions of the camper box?
Thanks, AL in Asheville

size

Posted:
Mon Jun 02, 2008 1:14 am
by dsmith6
It is on a 4 x 8 trailer from Harbout Freight. Here is link to camper size, thanks..
http://www.mikenchell.com/weekender/drawings.html

Posted:
Mon Jun 02, 2008 1:41 am
by asianflava
Would you consider a new HF trailer and $450?
It might be easier than having to dismount the body and re-mounting it for travel. That could burn up an hour or so of transit time. If someone has to drive some distance to pick it up, an hour not spent mounting the body could mean an hour closer to home.
Sorry, I'm not interested but this could be an option for someone who is.
weekender

Posted:
Mon Jun 02, 2008 2:50 pm
by dsmith6
I would , but I already have it sitting temp on another trailer. I used the other one to make a motorcyle trailer that I needed now. However I will sell the trailer it is sitting on now for $200. It is an older HF trailer with 8" wheels. aybody want pics and I will be glad to email them. Thanks for your suggestion.

Posted:
Tue Jun 03, 2008 8:07 pm
by Walt M
Where is it located?
Re: weekender

Posted:
Tue Jun 03, 2008 10:14 pm
by daddiozz
dsmith6 wrote:I would , but I already have it sitting temp on another trailer. I used the other one to make a motorcyle trailer that I needed now. However I will sell the trailer it is sitting on now for $200. It is an older HF trailer with 8" wheels. aybody want pics and I will be glad to email them. Thanks for your suggestion.
....more pictures would be appreciated... back/galley area as well as an inside shot or two detailing framing/spars etc ...I tried to access your photobucket link ,but it says those pics were deleted /removed.thx
pics

Posted:
Wed Jun 04, 2008 5:23 am
by dsmith6
I will try to get to those this afternoon.
reduced last chance $350

Posted:
Wed Jun 04, 2008 9:21 pm
by dsmith6
weekender

Posted:
Wed Jun 04, 2008 9:24 pm
by dsmith6
Interior is trimed out on the sides. New vent for the roof. If I dont sell soon I will consider selling the windows, vent and door hardware. Thanks again.
weekender

Posted:
Wed Jun 04, 2008 9:26 pm
by dsmith6

[img]One%20more%20pic%20of%20wall%20where%20window%20goes.%20%20window%20is%20just%20sitting%20in%20hole,%20not%20installed.%20%20thanks[/img]

Posted:
Fri Jun 06, 2008 11:20 pm
by daddiozz
..Thats very nice ....looks like you did a very good job on it ...

Posted:
Sat Jun 07, 2008 2:00 am
by Gage
Wouldn't it be nice if a newbie who wanted to post a few pictures, they would first read the instructions instead of going off half cocked thinking
they don't need to read any stinking instructions. It's so much easier to see the pic's when they are stacked unless you have a 30" monitor.
And by the way, $450 looks to be a good price for what it is.
weekender

Posted:
Wed Jun 11, 2008 3:33 pm
by dsmith6
This needs to go by 4th of July. I need the room for my bike inside. Lots of work done, but I will tear apart and sell the windows and other stuff after that. Thanks for looking. Hope someone needs this for a head start on a camper. [img][img]http://img.photobucket.com/albums/v713/tambos/IMG_0501WinCE.jpg[/img][/img]