Page 1 of 1

Cast Iron in the Northwest-sold

PostPosted: Sun Aug 10, 2008 9:18 pm
by dreadcptflint
My wife and I have recently come into a lot of Cast Iron. That we can not use all of so we want to part with some ot it to people that will use it. Here is the big picture:

Image

As you can see there is a lot here for almost everyone.

In the left from top. 3 #6 Wagner, #5 Wagner, #3 favorite piqua ware

In the middle from top: 10 1/2in Chicken Fryer, 9 inch skillet, 8 inch skillet, 7 inch skillet with dimples, 6 1/2 skillet

In the right from the top: #6 Griswald, #2108 Square Fry Skillet Griswald, #168 Square Utility Skillet Griswald, #3 Griswald skillet

These pieces came from a large collection from the pacific northwest. It has all been seasoned. If you are interested in a piece or the lot then please email: [email protected] .

PostPosted: Thu Aug 14, 2008 9:16 pm
by Dean in Eureka, CA
Does that skillet in the middle row, third up from the bottom have an Indianhead medallion on the bottom?
Looks like it could be a Wapak Hollow Ware, but it might be a Wagner also...

PostPosted: Thu Aug 14, 2008 11:03 pm
by dreadcptflint
Dean,
That one is a sale in progress. It does not have an Indianhead medallion on the bottom. It does have the following on the bottom:

8 INCH SKILLET

Z


It is a heavy little pan, the T is offset and the pan is smooth as a baby's bottom.

PostPosted: Sat Aug 16, 2008 11:52 am
by doug hodder
Is there a lid for the chicken fryer? Doug

PostPosted: Sat Aug 16, 2008 4:55 pm
by dreadcptflint
Doug,
The chicken fryer is still available. There is no lid. We ended up going down to the local sporting good store and found a lid for another pan.

PostPosted: Sat Aug 16, 2008 8:38 pm
by devigata
Could you please give dimensions for the #168 Square Utility Skillet Griswald (right hand side, next to the bottom)?

No parting with a waffle iron, perchance? :thinking:

'Preciate it,

Cathy

PostPosted: Sat Aug 16, 2008 9:15 pm
by dreadcptflint
The dimensions for the #168 Square Utility Skillet Griswald is 9 1/2 inches square and 2 inches deep. I have one waffle iron and sold another already.

PostPosted: Sun Aug 17, 2008 12:28 pm
by devigata
dreadcptflint wrote:The dimensions for the #168 Square Utility Skillet Griswald is 9 1/2 inches square and 2 inches deep. I have one waffle iron and sold another already.


Thank you, but the hubby "sort of" said no.

It sounded like, "Where are you going to put it?" but after 19 years, I know that translated to "No".

PostPosted: Thu Aug 21, 2008 1:40 am
by doug hodder
Anyone want chicken cooked in iron at the upcoming Jefferson State thing? I bought the skillet. Doug

PostPosted: Thu Aug 21, 2008 10:48 am
by Eunice
I love chicken! do you make the gravy to go with it? -

PostPosted: Thu Aug 21, 2008 11:42 am
by tinksdad
To heck with chicken.... that looks just like the one I used to make my donuts in.

Unfortunately, it was one of the pieces that went to the "ex" during the divorce!! :cry: Come to think of it.... that was the only sticking point during the proceedings.... who got what pieces of CI!!!

PostPosted: Fri Aug 22, 2008 1:05 pm
by dreadcptflint
Doug,

Just wanted to let you know the Chicken fryer went in the mail today, I hope you enjoy it.
:)

Suzie (Mrs. Dreadcptflint)

PostPosted: Fri Aug 22, 2008 5:00 pm
by doug hodder
Looking forward to it! thanks...Doug

PostPosted: Sun Dec 14, 2008 2:42 pm
by dreadcptflint
Thanks folks. All the for sale stuff is gone. :thumbsup:

PostPosted: Sun Dec 14, 2008 2:47 pm
by starleen2
Thanks for sharing with us :thumbsup: