Teardrops n Tiny Travel Trailers

Tear for sale in SC, You will not hear this much but I am gonna build another trailer and I am gonna sell my current trailer because it is too big.
It is 9"-2" on the frame and 56' wide and 4' high,, 12 volt lights and 120 v shore power hook up, three burner pull out propane cook top, full size bed inside, frame out for 5000 btu a/c, roof fan, dry and solid, with SC title.
If interested p.m. me ,, it is ready to go,,

This trailer has a lot more storage space than I need so I am gonna down-size. I am sorry but my flamingo's are not included

chip

There ya go Chip! What are you going to build?

Mike...

P.S. BTW, you've only got a couple photos on your photo album here:
http://photos.yahoo.com/abc187chip

Do you have any more photos?

Mike I have the whole build progress set of pictures in my aol file,, just need to move them over,,

I want to build a light weight, 8'x56"w x 4' H unit with a minimal galley, basic storage, and a few frills,, shape is still up in the air but will be a modified teardrop. There are a lot of sketches on the drawing board that could work,, now if I can just pick out one,,

design requirments are light, functional, basic, comfortable, dry and a coffee pot and pickle juice despenser,,

here we go again

chip

Hey Chip,
Just wanted to let you know you've got company in SC. I'm planning on building a TD in the near future to pull behind my '48 Dodge, probably a Cubby or similar TD. If you could, email me and let me know how much you're wanting for your trailer. I'm on a limited budget with a newborn so that's why I was planning on building so I could build it as I earned my "allowance".
By the way, I went to school at Clemson.

Chip wrote:
design requirments are light, functional, basic, comfortable, dry and a coffee pot and pickle juice despenser,,

here we go again

chip

You're right, that sounds like a basic unit. I think you should design around your pickle juice dispenser.

Consider this...

You could have your wet bar for RC and pickle juice...



And you could have your tap on the side for chasers...



Mike...

LMAO,,, Mike it might be mor fitting if I hung PJ in an IV bag on a medical pole beside the galley,, for medicinal purposes only,, ya understand,, cough, cough, sneeze

final design is still up in the air but I am gonna think more about it this weekend while camping,, sure hope I dont have to sleep on tha ground at spring fling,, how about Casa-de-Cardboard II,, sorry dave I had to use ya trailer name,,

have a great one,,,,,,,,,,,,,,,,,,,,chip

Mike,

Do you know if that is one of the Lil Guy options that most folks get? Or just the folks who need PJ and chasers???

Kerry

Kerry you have to show your Crown/pickle juice membership card before they will special order one with a spout,, not all are eligible or able to acquire a C/PJ card, so they are limiting the quantity of spouts,,



chipper

It sounds like you have everything under control there Chip... I'll let you fight your own dispenser battles!!!

On a different note... it's weekend... ah, finally... I'll drink to that!!!

Mike...

crown and pickle juice fer everybody

yall have a great weekend

Chip wrote:Kerry you have to show your Crown/pickle juice membership card before they will special order one with a spout,, not all are eligible or able to acquire a C/PJ card, so they are limiting the quantity of spouts,,



chipper

LMAO Do you need a PF (Pink flamingo) card too?

mikeschn wrote:

Chip wrote:
design requirments are light, functional, basic, comfortable, dry and a coffee pot and pickle juice despenser,,

here we go again

chip

You're right, that sounds like a basic unit. I think you should design around your pickle juice dispenser.

Consider this...

You could have your wet bar for RC and pickle juice...



And you could have your tap on the side for chasers...



Mike...

The door in that picture. That is the doord I want on my TD. How do I get them? Who do I contact?

I think the Little Guy is made by the Little Trailer manufacturing company. You might start by Googling for that!

Mike...

mikeschn wrote:I think the Little Guy is made by the Little Trailer manufacturing company. You might start by Googling for that!

Mike...

Thanks. My search turned up this URL: http://www.thelittletrailerco.com/

Hopefully I can get my hands on a couple of those doors.

Hey Chip,
Whatcha gonna call your new rig... The Pickle Barrel, perhaps?
Gota good idea for you... Why don't you do a Cafepress store and sell "I got pickled with Chip" shirts or something along those lines?