Page 1 of 1

Need bearings or seals?

PostPosted: Wed May 18, 2011 9:03 pm
by nevadatear
We are teardroppers that own Desert Metal Products, a custom machine shop in Lovelock, NV. We have a huge stock of bearings and seals, many of which are no longer made and no longer available anywhere. You have to see our shop to believe it.:lol: We have purchased from auctions and specialize in the hard to find stock. If you have a need for an antique or obsolete seal or bearing, feel free to give us a call or send us a pm. We may just have what you need.

775 273 3090, ask for Randy. :vroom:

PostPosted: Thu May 19, 2011 9:41 pm
by mary and bob
I could use a set of wheel seals for our '46 Modernistic. It's been 4 years since I greased the bearings, so it's time to do it. I won't have any specs til I pull a wheel, but as I recall they were a quite hefty seal, might even have been a leather seal. I'll try to find numbers, or at least get measurements. Bob

PostPosted: Thu May 19, 2011 10:12 pm
by nevadatear
Let us know with the numbers or as much info as you can, maybe even a pic, and Randy will take a look.