Page 1 of 1

Wanted- Spare wheel for my 63 Shasta

PostPosted: Thu Jul 21, 2011 7:18 pm
by bohemian
Does anyone have any suggestions to where I can find a 13" narrow wheel that has a 4 hole with a 4.5 bolt pattern.
I tried the internet, Not much success.
I tried my local junk yards. No luck.
Wayne

PostPosted: Wed Sep 14, 2011 9:35 am
by geartow
I took the hub off the camper and went on a walk about at the local junk yard kept trying it on every wheel till i found one that fit

PostPosted: Wed Sep 14, 2011 7:20 pm
by bohemian
Thanks geartow
Been there done that. :lol:
I may have tracked one down (finally)
Wayne

PostPosted: Wed Sep 14, 2011 9:00 pm
by Gage
Hey Wayne, an earley ford wheel will work. That's what I use for both my teardrop and the Dalton. Oh wait, your looking for a 4 lug and I'm talking about a 5 lug. :DOH2: You might check on a early Ford Pinto wheel. Take a lug pattern guage with you. Makes it easy. You can get them at most auto parts stores, cheap. ;)

PostPosted: Thu Sep 15, 2011 7:36 am
by bohemian
Thanks Gage!

I'm glad to see your back at it. :thumbsup: :thumbsup:
Wayne

PostPosted: Thu Sep 15, 2011 8:41 am
by bobhenry
4 on 4-1/2 (114.3 mm)
Acura - Legend '86-'89
Buick - Special '61-'63
Chevrolet
Corvair all 4-bolt
Chevy II all 4-bolt
Sprint '85-'87
Nova ('61-'70)
Datsun/Nissan - most models to '89
Dodge Colt '79-'88
Dodge Colt (early)
Ford
Mustang all '65-'68 4-bolt
Falcon, Maverick, Granada all 4-bolt
Mazda - 626, RX7 '83-'87 ????
MGA, MGB, MGC
Olds - F-85 '61-'63
Plymouth - Arrow, Sapporo '79-'88
SAAB all ???
SAAB - 900 to '87
Toyota - most exc. MR2 and P.U. to '89
Triumph TR 1..6

PostPosted: Thu Sep 15, 2011 1:38 pm
by bohemian
Now that's a list.
I tried my local junk yards. But they dont have any cars older than the 90s.
I will find out tomorrow if my connection will come through for me.
Thanks for the help.
Wayne

PostPosted: Thu Sep 15, 2011 4:13 pm
by reo-ron
Is'nt that the same wheel on some of the HF trailers?? This tire/wheel should also be available at most trailer supply/repair facilities.
Ron

PostPosted: Thu Sep 15, 2011 4:36 pm
by bohemian
I Believe that the HF wheels are 4-4" and I trying to find the ever elusive 4-4.5" wheel.
Thanks though.
Wayne