Page 1 of 1

4X8 'Cubby' (PA)

PostPosted: Sat Jun 16, 2012 9:42 am
by toypusher
4X8 Cubby (Kuffle Creek design) Built in 2005 on a HF 1175 trailer with 1 7/8” coupler and tongue jack with wheel.

Wheel chalks included

2-door design and is fully insulated Aluminum ‘mill finish’ exterior

Birch interior

Crank out window in each door with screens

Custom fiberglass fenders

Large locking tongue box

Under mattress storage in the cabin

Doors and hatch are keyed the same

Roof vent is a Fantastic Fan 3-speed reversible fan

Mattress is Grade A firm (includes set of sheets and a blanket)

Cabin storage has a fold down door that doubles as a table

Upper galley storage has sliding doors for more convenience when counter is in use

Paper towel holder on underside of hatch

Lighting is 12VDC with the battery in the lower galley area. (Optima yellow top)

There are 2 overhead lights and 2 reading lights (1 over each side at the front) in the cabin and a 2 setting florescent light in the galley (on underside of hatch).

Outside light over both doors

120VAC outlets – 1 in galley and 1 in cabin.

On board water in a 7 gallon tank with pump and faucet in the galley sink

Exterior side table with adjustable support attaches to side of Tear

Includes spare wheel and tire

$3200.00

Pictures found here: http://s281.photobucket.com/albums/kk21 ... or%20Sale/

(More pics and build pics here: http://s281.photobucket.com/profile/toypusher )