We built our standee in 2009 and have enjoyed camping with it until this year when the self-storage yard which is 2 miles away from both of the campgrounds we normally camp at stopped allowing campers to be stored there. We found ourselves not wanting to tow the trailer the 2 hrs each way and this summer we started tent camping again. The camper is not getting a lot of use so we have decided to sell.
Here’s the link to my build post : viewtopic.php?f=50&t=31730
My for sale post is quite a bit different for this web site as the audience may want the camper for different reasons. Maybe you’ve been thinking about a design of your own and were daunted about the challenge of acquiring all the different parts that you would need for a camper, well here’s your chance to get quite a few of them all at once and for quite a bit less than you could anywhere else.
On the other hand if you were looking for a complete camper, this one needs a little work to camp regularly. There is some rot on the exterior plywood panels in the front and back of the camper. I did not add a drip edge and water wicked up into the ply and rotted the bottom. The fiberglass skin could be cut at the edges and rolled u, the ply replaced and the skin could be glued back down fairly easily. I estimate $100 in materials and about day of effort.
We are asking $500 and are not interested in parting out.
If interested please contact me at matthew(period)t(period)krause@gmail(period)com
Here are some of the items that could easily be re-used in another design
Door 300
2 Big Side Windows 100
Front window 35
Sony Stereo 150
Pioneer Speakers 100
Fantastic Vent 140
Trailer Frame 150
Trailer Tires 200
New Decking 100
12v Switch Panel 100
Total 1375
