Teardrops n Tiny Travel Trailers

I am giving this frame away at this price

Location Eufaula Oklahoma

So life has its setbacks as they say. Up for sell is my new standy frame, here are the details

Frame Size:

7x9 Frame Box (building area).................12 foot overall Length from tongue to rear

Frame Materials:

2x2 1/8 square tubing................ Frame Box
2x2 1/8 square tubing................ Tongue
2x2 1/8 square tubing................ Cross-members
1x2 1/8 rectangular tubing.......... Entire drop floor

5 foot 2000lb. Axle with leaf springs
15x7 Smoothies with 0 offset. They are Chrome and then plain steel on the inside (still un-painted).
smoothie hubcaps for the centers
205 70 15 whitewalls
2 inch hitch coupler
bulldog 2000lb jack.

3/4 Plywood for the top deck and all the plywood has been undercoated with Herculiner on the bottom.

Total weight 680lbs

This is what i have in it cost wise thus far

$670 for the welding
$350 for the steel, coupler, and jack
$190 for the two tires
$200 for the rims and the smoothie hubcaps
$120 for 3 sheets of 3/4 plywood
$15 for the paint on top
$100 for the Herculiner used to treat the underside of the plywood
$50 in spray paint to paint the frame
$30 in screws,safety chains and misc.



Total $1725.00



This frame is ready to be built on



Asking $500.....$1200 under what i paid to have it built!!

bump

Davagio wrote:bump

What a fantastic deal!!! I can't believe you haven't sold it yet! If you were within 400 miles of me, I'd come and get it!

Has this frame sold? Do you have any pictures that show the whole thing? What is the ground clearance of the standing area?

Minor Project wrote:Has this frame sold? Do you have any pictures that show the whole thing? What is the ground clearance of the standing area?

By the whole thing, do you mean the other side???? I mean if someone needed those im sure i could get some...however it looks the same on the other side as well, minus that bar where the drop isnt cut out.

The ground clearance is approx 8 inches at the drop (the lowest point).

Davagio...sent you a message with some questions.

Do you still have this frame for sale?

Moosemt wrote:Do you still have this frame for sale?

Yes sir i do, if you have any questions feel free to inbox me.

Whats the bolt patter? Looking to build one to match my jeep tires and run 33s on it

Jeeper92 wrote:Whats the bolt patter? Looking to build one to match my jeep tires and run 33s on it

Look at the last two pics of this listing. You might have a little trouble using 33's without modifying the frame some.

Boy that is a lot of trailer for the price!
Those who are looking at those HF trailers may want to reconsider?????
Good Roads
Brian & Sandi

Vedette wrote:Boy that is a lot of trailer for the price!
Those who are looking at those HF trailers may want to reconsider?????
Good Roads
Brian & Sandi

If that thing was in California, I'd be all over it. It would make a good hauler for my Fiat Abarth 850 tc (clone).

Did you get my PM ?

tac422 wrote:Did you get my PM ?

Who are you talking to?

tac422 wrote:Did you get my PM ?

Nope!