Teardrops n Tiny Travel Trailers

I have a half finished, Sketchup Designed canned ham (completed Sketchup model available). Open heart surgery and age overtook me, and the will and ability to finish is gone. It occupies most of my shop and prevents me from doing anything else. I need someone to take over the project and move it to their location and either finish it or whatever. It would be nice to get my cost out of all the parts, but the most important thing is to get it physically gone, so the shop is usable again. It is physically located North of Seattle. In a pinch, it could be towed with strap on lights, but may have to go on a trailer. I have many additional parts and materials that can go along with it. If there's any interest in this, respond to this post and we can talk more details.

I have pics available, but I don't remember how to get them from my computer into this forum. I'll work on it and post them as soon as I can

Questions??

TheDuke

Well, I've gotten four pics (all I've got) into Photobucket. At this point I can't find any directions for transferring them into this forum. Can anyone help?

TheDuke

When you are in photobucket there is a link on the right of your picture that says direct. Copy that link and then paste it between "[img]LINK%20GOES%20HERE[/img]"

OK. I managed to get the four pics I have of the trailer construction into my personal album. Since I've forgotten most of what I ever knew about this forum, I don't recall if that area of the album is accessible to the general membership, or just to me. I hope that everyone can now view these pics. If not, please reply and let me know what to do to make that happen.

TheDuke

Good pix & a nice start on your trailer Duke. Too bad health has interfered with your build. Got my TD done 10 yrs ago when I was in my 60s. I wouldn't start on one now! Hope you're able to find a buyer who'll complete the trailer as designed. Good luck!

Thanks for the good thoughts, Harv. It's not the way I wanted it to turn out.

Actually, right now I'm not concerned that the trailer get's finished just like I designed it. My emotional attachment is gone. I'm interested in two things: I want to get some of the value out of it (however small that may be), and I need to get it out of my shop, so I can work on some smaller projects more appropriate for my changed circumstances. The alternative is to tow it to the dump and push it over the edge, which would be a tragic waste.

TheDuke

??? I can't find the pics

Sent from my SM-G360T1 using Tapatalk

They're in my personal album. Harvey was able to see them. Check with the Board monitors. Let me know what they say.

[img]/http://i1369.photobucket.com/albums/ag222/larryduker01/DSC03993_zpsaiq8enly.jpg[img]

Hmmmm. That didn't work

OK. That worked. Let's see if I can do it again!