I'm looking for a detailed description of teardrop side door construction. Primarily, I'm concerned about how you trim out the edges of the door and the type of seal to use. Any help pointing me to a supplier for parts would be great as well. We have our doors made but aren't really sure where to go from here. We have some T-molding to wrap around the edge of the door....but no idea what else to do. Same goes for the inside edge of the door.
I will post some pictures for clarification tonight. Any help is appreciated!
Teardrops n Tiny Travel Trailersor t n ttt for short (tnttt.com) |
Door Construction
2 posts
• Page 1 of 1
Door Construction
by sabrown82 » Sun Aug 11, 2013 11:31 am
- sabrown82
- Teardrop Advisor
- Posts: 53
- Joined: Tue May 21, 2013 5:03 pm
Re: Door Construction
by DMcCam » Mon Aug 12, 2013 11:15 am
Hi Sabrown,
You can see how I did my doors starting on this page from my build journal http://www.tnttt.com/viewtopic.php?f=50&t=35081&start=390 and continuing over the next few pages. I used edge molding and T molding for my doors. I hope this helps.
All the Best,
Dave
You can see how I did my doors starting on this page from my build journal http://www.tnttt.com/viewtopic.php?f=50&t=35081&start=390 and continuing over the next few pages. I used edge molding and T molding for my doors. I hope this helps.
All the Best,
Dave
-
DMcCam - Gold Donating Member
- Posts: 883
- Joined: Wed Jan 06, 2010 8:30 pm
- Location: Reno, Nevada