Custom machine shop

[OurStuff4You]

I received this link and information from an email list I am on. Thought some of you "do it yourselfers" might have an interest in this.

Rhonda

Www.emachineshop.com


Ladies and gentlemen:

Ever wish you had a machine shop to create your own parts, just like the
guys on Discovery Channel's American Hot Rod and American Chopper? Well, now you do:

Robert Gideon
64 Newport vert

Internet machine shop offers custom tooling
Thursday, August 26, 2004 Posted: 11:19 AM EDT (1519 GMT)

(AP) -- It's the Internet Revolution meets the Industrial Revolution: a new
program that lets people design 3-D objects like car parts and door knobs in metal or plastic then order them online.

Programs for computer-aided design, or CAD, have been around for decades, but eMachineShop.com appears to be the first service that checks whether a design can be made, tells the customer how much it will cost. If the customer wants the item the design goes to a "real world" machine shop for manufacturing.

The key to this enterprise is free design software provided by eMachineShop that aims to be simple enough for hobbyists and other non-engineers.

Prices won't be competitive with Wal-Mart, but Wal-Mart won't make ten
copper door knobs, then sandblast them for you. EmachineShop charges $143 for that.

The company was created by Jim Lewis, a programmer and self-professed
"tinkerer." One previous credit: "the world's hardest sliding block puzzle."

Lewis' software company, Micrologic, designed eMachineShop and contracts with machine shops all over the world to do the manufacturing.

Even though the Midland Park, New Jersey, company, which has 19 employees, doesn't advertise, it has handled more than 1,000 orders for things like door signs, motorcycle seats, robot frames, car engine covers, guitar plates and camera parts.

The most expensive item it's sold since it began beta testing last year is a
$4,011 aluminum, 26-inch diameter part for a high-powered laboratory magnet.

The customers range from large companies that make prototypes to hobbyists including Dennis J. Vegh of Mesa, Arizona, who had the company make metal parts for an airplane he's building after a 1929 design.

"I had to have the pieces made because they do not exist anywhere," Vegh said.

He found the software quick and easy to use. The quality of the finishing
has varied a bit between orders, but has been acceptable, he said.

"Being able to sit at you home computer, draw up some parts, submit them and 30 days later they are on your doorstep, all without human contact, is mind-blowing," Vegh says.

Merging design and manufacturing

EMachineShop.com provides software that companies can use to design machine parts on a computer and have them manufactured.
Lewis, the company founder, estimates that with conventional methods, it
takes about 40 hours to design a part, get a quote, straighten out
manufacturing problems with the machine shop and put the order in.

Taylan Altan, professor at the College of Engineering at Ohio State
University, agrees, saying the process can easily drag out to two weeks.

"One of the biggest problems we have today in American design and
manufacturing is that designers know very little about manufacturing," he
says.

As a result, designers draw parts that are hard to make and require several rounds of modification before they can be put in production, a problem eMachineShop aims to avoid by building the knowledge of a machinist into the design software.

For instance, if you're designing a part made of sheet metal, it won't allow
you to include a bend too close to an edge -- the machinist needs enough
surface to hold on to when bending.

Lewis is also working on Pad2Pad, an application that makes electronics.
Manufacturers of printed circuit boards, like PCBExpress.com, are already
online but Lewis aims to take the concept one step further by also attaching components like resistors, capacitors and chips to the boards.

Pad2Pad is taking orders, but is "a couple of years behind eMachineShop" in its development, Lewis says. One problem is stocking the components
customers want.

Lewis also wants into branch into what is perhaps the least sexy segment of manufacturing: making cardboard boxes for packaging.

"My dream is essentially to become the Amazon in the manufacturing segment," Lewis says.

[Mark Mckeeman]

Hi,

By fluke I found the same website last night. They have a free CAD program download with 3D imaging. I downloaded it work, 20 seconds instead of 20 minutes at home. I played with it a bit at lunch time but the program seems to have its limits.

Anyone know of a better free CAD download?

Mark