by Shadow Catcher » Thu May 24, 2012 8:18 pm
I am pleased. I have a lot to do yet, all of the electrical has to be stuffed back into the tongue box. Battery, shunt for the battery monitor, the RJ12 connector was ripped off in the accident so I have to replace that, solar controllers, and air pump and controls for the air shocks. One of the good things that came out of this is that while he was replacing the axle I had him weld on the support/lug for the air shocks so we will find out if that will actually work. The Bulldog hitch and a non wimpy jack (you looked at the old one and it would lean) is welcome. He also added a piece of rubber roof over the galley hinge to keep water out when it is raised.
One problem is that he fixed the original propane bottle holder and the new see through 25# bottle is just a bit bigger so I will have to cut and alter the holder. Oh well if that is the only problem...