corner moldings

[Modstock]

Has anyone used corner moldings to hide electrical wires . Id need something slightly flexible to follow the shape inside.
The previous owners wiring doesent make sence to me so the wiring wont be inside the roof. Just wiring up about 4 lights (two reading lights and 2 other lights).
I'll be cutting off the previous owners wiring and stuffing it back into the roof.

[pete42]

I don't know what your building but this has been ask before and the answer is yes
some use factory moldings others have made their own using shaped wood and paneling like this.

pete

[Roly Nelson]

Good idea, that is where I ran most of my wiring. I routed wire-races on the back side of the molding, which was part of the structural corners within the tear. Only problem I had, was when I shot a staple into the low voltage wire when I put the roof plywood on. Oh well, I over came it, probably just like you are about to do. Good luck.
Roly ~~