Whatcha do on your build today?

[mikeschn]

On my build today... it's too cold outside... so the plan is to poly the drawers in the basement...



Mike...

[Vedette]

Steve
Was it warm enough for you to get anything done??
Another day off for me......Grandson sleep over!
Good Roads
Brian

[Vindi_andy]

Go tthe last of the stick frame glued onto the first wall just need to fit the insulation then stick the other side to it.

Got myself a leisure battery and tested my LED lights for inside, they look fab, Fitted hose and plug to the pump and tested the submersible pump and tap. all in all not a bad day.

[jeff0520]

Today I started applying the duraglass fiberglass body filler to the seams and external screw holes. Once it got too dark to work I went inside and started on a cabinetry plan in sketchup. Camping trip is scheduled for end of May. I'm beginning to wonder if the Command Post will be ready in time

[pchast]

Still shopping and waiting for that IRS refund.

Pete

[doug hodder]

Just keep slugging away at it Jeff....I'm in the same situation, have a trailer I want done for a June 6 event. I am "hell" bent to get it done on time, so get up way early on the weekends and try to stuff 3 days of building into 2. Sorta getting tired of that schedule though. A killer for me is having to take a long trip to pick up materials. You've got the right approach to it...if you can't do something, find something else to do...it'll happen, you just gotta make it happen. I make a punch list and cross off the items that need to be done, that way I see some progress as I go along, no matter how small it may seem. Doug

[droid_ca]

Well I still have snow so it's good to put it on the back burner for a while, I'm also assisting a long time friend with some legal battles so that is going to take the lead for a while, But when done I'm thinking that I should go full force for a while, I might get some assistance latter on when I need it but for now I just bide my time and read about all the excellent progress that everyone on here is doing

[Keystone]

I talked to the shop that is installing my AC and electrical service. Best I can do until winter breaks and I can start working outside.

[Vedette]

Looked at the the thread on "Clever Mods" got seriously inspired.....went out to the shop full of excitement!
Got out there and had t!o work on customer stuff all day!
I just want to be retired full time Guess it will not happen until I invest in a locking front gate!
Good Roads
Brian & Sandi

[mcwbyu82]

Cleaned up my garage and rearranged a few things to make it more condusive to building the trailer. My available work times over the next few months are gonna be a few random hours here and there so i want them to be as productive as possible. Hate to spend an hour of the two or three i might have searching for tools or moving stuff around to get at the trailer

[Woodbutcher]

Yesterday I shortened the tongue 10" on the "Slowmobile" to fit it in closer behind the new TV. Today I have the "Woodybago" in the shop. Repacked the bearing and checked the brakes. Then I re coated some of the trim with Helmsman. I may do the sides again as long as I have it in there.

[Vedette]

Mike
You could save money by filling up your vehicles with gas every day!
I hear Wyoming has the cheapest gas in the country.
Our gas started creeping up in price since last week......95 cent/gal increase in a week.
Bringing it up to $5.94 / gal. for Regular! You need a second mortgage to buy Premium.
Good Roads
Brian

[S. Heisley]

I hear Wyoming has the cheapest gas in the country.

Brian

That's probably the stuff that is watered down with Ethanol and gives poor mileage.

[S. Heisley]

With all the coal that B.C is pulling out of your neck of the woods maybe you could grab a few truck loads andrun your vehicle off of that

That is traditionally used with a steam engine.

[Vedette]

I am reassembleing my blower assembly and installing the Blower Motor resistor.
Litlle rewiring required!
Good Roads
Brian