Georgeandpat wrote:I don't know if this is a crazy idea but I would welcome some feedback. I am in the process of installing a sink and faucet in my tear. Space is tight (bet you never heard that one before) and I've been mulling over where to put the faucet handle. Since my sink is to the far left side of the Galley, it occurred to me that I could place the faucet handle just to the left of the sink outside of the galley on the left side of the trailer(kind of a drinking fountain arrangement). It is within easy reach as one stands in front of the sink, gives the sink area a "cleaner" look, and water from wet hands would drip on the outside of the trailer when turning off the faucet. I could have a shut-off below the sink to prevent unwanted activation. George.
Steve_Cox wrote:I found a tiny faucet with a switch built in at JC Whitney. It came with a 1.5 GPM pump and cost about $25.
ClickyTiny faucet/switch/pump
Steve
madjack wrote:...one thing about that pump, is that it is not self priming...it was made to screw into the bottom of a water tank or mount at the lowest level of the tank
madjack
Users browsing this forum: Bing [Bot] and 4 guests