WINDOW

[greenchicken]

Ready to install some windows.

I want a small round window in the door.

Any recommendations?

[Atomic77]

Ready to install some windows.

I want a small round window in the door.

Any recommendations?

I made my own. I had tempered, tinted glass cut at the local glass shop and got the rubber from a street rod shop. I would have preferred vented but couldn't find anything out there in the size I wanted

Here's a couple on Amazon I looked at:

[tony.latham]

Ready to install some windows.

I want a small round window in the door.

Any recommendations?

Vintage sells a 12" round window.

T

[edgeau]

My round ones are boat portholes I picked up from a 2nd hand boat parts dealer.

Sent from my Pixel using Tapatalk

[KennethW]

Low cost? Glass plate

Sent from my Moto G (4) using Tapatalk

[working on it]

Operable?, w/tempered glass? There are some with ABS plastic frames, locking knobs, lock rings (says "click in installation), and tempered glass on Amazon for cheap, if that might be an option. I like this 10" diameter unit, in black (matches my trailer) if ever I choose to put 'em in my plywood doors.

porthole.JPG (113.77 KiB) Viewed 1102 times

[greenchicken]

Thanks.... I saw those also. Hoped for Vented too.

Question: They say 1/8 or 1.5 inch. My door is 3/4 Inch.

Will it work?

[working on it]

I would cut a duplicate locking-ring backing plate from 3/4 plywood. 3/4"+3/4'=1.5" It will firm up any wiggle room there might be, also, IMHO. Good to go.

[kmack67.km]

Resurrecting an old thread, but does anyone know if those portholes can be installed to open inwards?

Kevin

Sent from my SM-G950W using Tapatalk