Titebond II and Fabric Skin

Anything to do with mechanical, construction etc

Titebond II and Fabric Skin

Postby Fyddler » Wed Apr 17, 2013 6:51 pm

I know this has been talked about in several threads, primarily in the Foamie sections, but I am planning on using this technique on my wood trailer. I was thinking about Gako roof as an inexpensive simple one step solution, but after talking to a painting expert he reminded me that the biggest concern is flex and sheer at the joints, and cracking of the coating at the joints. Grako is a great product, but it is made for stationary roofs that only flex from temperature changes, not a trailer bouncing down the freeway. He highly recommended the use of Gako (or any product) in conjunction with a fabric. This brought me back to the idea of canvas & Titebond II combo. I understand that for foamies since the skin is a structural component a heavy canvas fabric is important over a muslin type of material, but how about for wood construction? I am thinking that bed sheets will be plenty thick for this application since it is no longer a structural component, and give a smoother finish as well.

Thoughts?
To err is human, to really foul up requires a computer

Build Log: http://www.tnttt.com/viewtopic.php?f=50&t=55017
User avatar
Fyddler
The 300 Club
 
Posts: 349
Joined: Sat Sep 01, 2012 9:52 am
Location: Port Orchard, WA

Re: Titebond II and Fabric Skin

Postby danlott » Wed Apr 17, 2013 10:13 pm

Check out desertmouse's build. They used canvas and Titebond II. I have seen there trailer in person and it is very nice.

Image

http://www.tnttt.com/viewtopic.php?f=50&t=45718

Dan
Hoplite Traveler Build thread
Image Image
Life is what happens to you while you're busy making other plans.
User avatar
danlott
Donating Member
 
Posts: 874
Images: 264
Joined: Fri Mar 06, 2009 2:18 pm
Location: Winnemucca, Nevada

Re: Titebond II and Fabric Skin

Postby Fyddler » Wed Apr 17, 2013 10:50 pm

That's what got me thinking. I thought maybe Goodwill bed sheets would give a smoother finish and be cheaper... Until I priced sheets at Goodwill! I'll probably go with the Harbor Freight drop cloths, but still undecided. Thanks!
To err is human, to really foul up requires a computer

Build Log: http://www.tnttt.com/viewtopic.php?f=50&t=55017
User avatar
Fyddler
The 300 Club
 
Posts: 349
Joined: Sat Sep 01, 2012 9:52 am
Location: Port Orchard, WA
Top

Re: Titebond II and Fabric Skin

Postby bonnie » Thu Apr 18, 2013 6:20 am

You might also want to look at the canvas suppliers list in the Foamie section. For a smoother finish, you could use a lighter weight canvas or cloth. Fabric stores usually have duck cloth and heavier muslin. One thing to watch out for is the fiber content. I have also seen discussions where fiberglass cloth is used with TBII or TBIII to make coverings. I was thinking about going that route to save some $$. I'm not at that point in my build, but soon.
Remember, the turtle won. :)
User avatar
bonnie
Donating Member
 
Posts: 1390
Images: 107
Joined: Sun Jul 24, 2011 4:14 pm
Location: Roxana, IL
Top

Re: Titebond II and Fabric Skin

Postby clermont cubby » Thu Apr 18, 2013 7:05 pm

I used the drop cloth/ titebond III covering on a sailboat I built last summer. We use the boat several times a week and I have been very pleased with its performance. 97436

Should work very well on your teardrop.

Larry
clermont cubby
Donating Member
 
Posts: 126
Images: 16
Joined: Thu Dec 22, 2011 7:08 pm
Location: clermont fl
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 3 guests