How many doors?

Anything to do with mechanical, construction etc

Re: How many doors?

Postby working on it » Thu Dec 25, 2014 9:54 am

I got the tent at Academy Sports; it was on the shelf next to the $50 Easy-Up canopy. For $20, it was an obvious choice.
2013 HHRv "squareback/squaredrop", rugged, 4x8 TTT, 2225 lbs
  • *3500 lb Dexter EZ-Lube braked axle, 3000 lb.springs, active-progressive bumpstop suspension
  • *27 x 8.5-14LT AT tires (x 3) *Weight Distribution system for single-beam tongue
  • *100% LED's & GFCI outlets, 3x fans, AM/FM/CD/Aux. *A/C & heat, Optima AGM, inverter & charger(s)
  • *extended-run, on-board, 2500w generator *Coleman dual-fuel stove & lantern, Ikea grill, vintage skillet
  • *zinc/stainless front & side racks *98"L x 6" diameter rod & reel carrier tube on roof
173193172890148599
User avatar
working on it
2000 Club
2000 Club
 
Posts: 2189
Images: 457
Joined: Tue Oct 04, 2011 9:05 pm
Location: DFW Texas

Re: How many doors?

Postby bc toys » Fri Dec 26, 2014 9:11 am

Thanks for getting back with me so quick
bc toys
2000 Club
2000 Club
 
Posts: 2217
Images: 42
Joined: Sun Jun 28, 2009 2:45 pm
Location: LAS VEGAS NV

Re: How many doors?

Postby ctstaas » Fri Jan 02, 2015 9:48 pm

Hi Everyone,
When I built mine the plans I used said to cut the doors out after the cabin is assembled. I vote WRONG! I wish I would have cut the door openings when the sides were paired up and I'm cutting the front and rear curves. i can't figure out why the author said that? I ended up with one door and wish I had two. I can always add the second later but it harder to cut out now. The door trim will hide a multitude of errors so it doesn't have to be perfect execution but would have been much easier to do in the flat position. Crawling over each other in the middle of the night was a near deal breaker for the ex G.
Enjoy, Chris
ctstaas
Teardrop Master
 
Posts: 252
Images: 12
Joined: Sat Mar 22, 2014 4:40 am
Top

Previous

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 3 guests