axle safety question. Part 2

[bronco]

this might explain alot all the seats i saw on the website are for round axles and my axle is a harbor freight square u-shape axle tube. so it wouldnt work

[Nitetimes]

That part I wasn't aware of. If that's the case and it's open on the bottom where you need it to sit on the springs you will have to weld a plate on there and drill it.
Now you see why pictures are such a big help!!
Not all axles are created equal and the ones most of us are used to dealing with are round.
Sorry if'n we cornfuuused you!!

[bronco]

not a problem rich, this web site is great and i apreciate your help and thanks for your time

[Sonetpro]

right now my deck heigth is 16" from the ground if i put the axle back under the springs itll be about 19" deck heigth from the ground.is that a bad thing to have, or is it just a matter of preference?

That's not a bad thing. Mine is 19" but I like it. It's the same clearance that my Jeep has. Are you pulling it with that nice Bronco in your album?

[bronco]

yes part of the time will be spent behind the bronco and some behind a ford escape my wife drives. ive tried downloading other pics of the bronco and the t.d. build but it was an accident i was able to download the only pic thats in there so far.