Galley countertop material?

Anything to do with mechanical, construction etc

Galley countertop material?

Postby methridge » Fri Jan 01, 2021 4:55 pm

I've mostly finished my build and I've actually taken it out and camped a couple times now. But I'm not happy with my countertop. Currently just a sheet of 3/4" plywood, covered in two coats of epoxy and 5 coats of polyurethane (Varathane, exterior, semi-gloss). The Varathane isn't as durable as I'd hoped, and I've already noticed some dents into the wood from pretty light usage.

I'd like to put something on top of my current countertop, but not sure what. It has to be something thin, I've got a sink and an electrical box that needs to be able to open up, so I can't put another 1/2" or 3/4" kitchen countertop from Ikea or Home Depot or anything like that. Maybe something smooth that I can apply like paint, but dries very durable? Or a thin (1/8" or so) film/plastic/linoleum material? Heck, I'm even contemplating a thin sheet of copper.

Any suggestions?
methridge
Teardrop Inspector
 
Posts: 14
Joined: Wed Jul 08, 2020 12:01 pm

Re: Galley countertop material?

Postby halfdome, Danny » Fri Jan 01, 2021 5:31 pm

Best surface is plastic laminate aka Formica, Wilson Art etc.
Since your countertop is already installed cut the plam a little small and glue it down with contact cement.
You could use , wood, aluminium or whatever to trim out the gaps from cutting it undersized.
You can order it and the glue in the kitchen department at Home Depot.
:D Danny
ImageImage
"Conditions are never just right. People who delay action until all factors are favorable do nothing". William Feather
Don't accept "It's Good Enough" build to the best of your abilities.
Image
Teardroppers Of Oregon & WashingtonImage
User avatar
halfdome, Danny
*Happy Camper
 
Posts: 5887
Images: 252
Joined: Sun Aug 14, 2005 11:02 pm
Location: Washington , Pew-al-up

Re: Galley countertop material?

Postby tony.latham » Fri Jan 01, 2021 6:57 pm

I used some heavy-gauged galvanized sheet metal with this last build.

Image

Stainless would have been a notch up but there was none to be found in this little town.

Tony
User avatar
tony.latham
Gold Donating Member
 
Posts: 7011
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top

Re: Galley countertop material?

Postby rjgimp » Fri Jan 01, 2021 7:03 pm

Is stainless steel or even aluminum available near you in 1/8"? If you can accommodate that thickness that might be the ticket.
-Rob


I hope to make it to a Procrastinators Anonymous meeting someday...
just as soon as the steering committee gets around to scheduling one!
User avatar
rjgimp
500 Club
 
Posts: 827
Images: 7
Joined: Fri Feb 22, 2019 3:59 am
Location: Saint Paul MN
Top

Re: Galley countertop material?

Postby flyweight » Fri Jan 01, 2021 9:51 pm

Stainless is great and what I have, but FYI it won’t look perfect after a few trips either. Everything scratches it and you can see fingerprints or wipe streaks in it pretty easily. It’s also sometimes blinding in sun. My suggestion is to accept wear and pick the material that you think will last you the longest for your circumstances. There’s always a point where imperfections become character!
User avatar
flyweight
Teardrop Inspector
 
Posts: 13
Joined: Sun Nov 22, 2020 7:32 am
Top

Re: Galley countertop material?

Postby noseoil » Sat Jan 02, 2021 9:58 am

Formica will be durable & easy to put down on the existing counter, if you can remove the counter to do the lamination & edges.

160263
Build log: viewtopic.php?f=50&t=60248
The time you spend planning is more important than the time you spend building.........

137905
User avatar
noseoil
1000 Club
1000 Club
 
Posts: 1821
Images: 669
Joined: Sun Apr 27, 2014 8:46 am
Location: Raton, New Mexico, living the good life!
Top

Re: Galley countertop material?

Postby bobhenry » Sat Jan 02, 2021 12:25 pm

The ceramic tile I put on Chubby had been down 12 years and thousands of miles I just used %100 silicone and grouted with the same ...

Image
Growing older but not up !
User avatar
bobhenry
Ten Grand Club
Ten Grand Club
 
Posts: 10359
Images: 2623
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN
Top

Re: Galley countertop material?

Postby aggie79 » Mon Jan 04, 2021 9:29 am

Glass mosaic tile with epoxy grout:

Image
Tom (& Linda)
For build info on our former Silver Beatle teardrop:
Build Thread

93503
User avatar
aggie79
Super Duper Lifetime Member
 
Posts: 5405
Images: 686
Joined: Tue Aug 07, 2007 5:42 pm
Location: Watauga, Texas
Top

Re: Galley countertop material?

Postby prohandyman » Sat Jan 09, 2021 5:19 am

Where are you located? I have a roll of Formica that I no longer have a use for
Dan
155200 Facebook group 164774163701
User avatar
prohandyman
Super Lifetime Member
 
Posts: 1919
Images: 785
Joined: Fri Dec 22, 2006 3:21 pm
Location: Greenwood, IN
Top

Re: Galley countertop material?

Postby rjgimp » Sat Jan 09, 2021 3:56 pm

prohandyman wrote:Where are you located? I have a roll of Formica that I no longer have a use for


I believe methridge is in California.
-Rob


I hope to make it to a Procrastinators Anonymous meeting someday...
just as soon as the steering committee gets around to scheduling one!
User avatar
rjgimp
500 Club
 
Posts: 827
Images: 7
Joined: Fri Feb 22, 2019 3:59 am
Location: Saint Paul MN
Top

Re: Galley countertop material?

Postby Shadow Catcher » Sat Jan 09, 2021 8:34 pm

163692 Formica
User avatar
Shadow Catcher
Donating Member
 
Posts: 6002
Images: 234
Joined: Sat Apr 11, 2009 8:26 pm
Location: Metamora, OH
Top

Re: Galley countertop material?

Postby wannabefree » Sun Feb 21, 2021 10:52 pm

We used Corian. It's heavy, but with 200 lb tongue weight I don't mind hauling around a bit of lead in the back. If you glue the stuff, be sure to rough up the faces real good. I had glued a strip across the front to hide the plywood underneath; it popped off the first trip. That hasn't happened again.
In anything at all, perfection is finally attained not when there is no longer anything to add, but when there is no longer anything to take away.
-- Antoine de Saint-Exupery
User avatar
wannabefree
The 300 Club
 
Posts: 380
Images: 82
Joined: Fri Jul 11, 2008 11:00 pm
Location: Phoenix
Top

Re: Galley countertop material?

Postby western traveler » Mon Feb 22, 2021 12:28 am

I am leaning towards a brushed stainless countertop and backsplash on my build. I have put several galleys together on fishing boats over the years all seeing heavy use (as in serving thousands a year) a couple for over 20 years. None have had to be redone and they pass health inspections yearly.
Take the measurements to a local shop and it is easy for them to bend one out to fit your space.
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana
Top


Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 4 guests