by MJS613 » Wed Jun 16, 2021 8:00 am
There is no rain scheduled for a week or so, so it is drying out now, I got some epoxy to use to glue it back I will drill some holes I think and fill with the epoxy and clamp the crap out of it. Then sand and soak in marine epoxy again but take my time and make sure it coats well. After I do that I will look at how to trim it out. First thing I need to do is fix my hatch hinge so the water doesn't leak in, and the hatch sits right. Hopefully the new one will be here this week or next, it's in the hands of the postal service. Once I get the hinge changed and the hatch in it's proper final position I can see what kind of gaps I have and sort out the trim and seals. I was looking at doing aluminum trim with butyl tape underneath. If I seal with the melamine can I still put the aluminum trim over it?