This weekend I decided to install a sink in the teardrop. (I would have rather been to the IRG but couldn't make it.) So, I went to the locale restrurant supply company and found a steam pan just the right size and for a great price, $10.00. Beat an RV sink for $65.00! I had to cut a hole in the bottom for the drain but with a good blade in the jigsaw it was pretty easy. I used a small bar drain and an RV supply store had the drain hose and pump. I cut the hole out of the counter and set it all in. The drain goes out the side of the trailer. I used a 5 gal water container and drilled out the air relief hole to fit the 3/8" pump hose. Filled the container, pushed the hose in, added a short hose to the side of the trailer and it works great! Since the steam pan is flat inside the sink doesn't drain completely, but that's ok. ( A little water left standing.) It's mostly for drinking water and a little washing. I can always add an electric pump if I need MORE POWER!
Sink cut in the countertop, with gasket and screws.
Water container and pump hose and drain setup.
Drain on outside of trailer. Bucket to hold the used water and not make a mess.
Pump.