I'm trying to decide what would be the "best" sealant, or method of sealing, the aluminum trim to the aluminum sheeting (like the corners where the roof meets the siding). I can think of 3 materials but not sure if there are advantages of one over the other:
1) Butyl Tape
2) a sealant like Pro-Flex RV
3) VHB Tape
I'll be using aluminum moldings from Vintage Technologies and in addition to the sealant method will also use stainless screws to attach the moldings.
Asking for any thoughts and/or suggestions.......that would be helpful.
Thanks very much!
John