How long a tounge, this is my question

[scopeaddict]

im building a 5X9 frame/tear, ive got some more cash, so i wanted to get the tounge and angle braceing welded up,

what size for the tounge?

how long from the front/frame to Jeep-hitch

How far back into the frame,


--
--
--
--
---------------------------@
---------------------------@
--
--
--
--

thanks
johnp

[Miriam C.]

Here ya go Johnp.

http://tnttt.com/viewto ... sc&start=0

Andrew posted a chart many months ago. If you are building the "Trailer and Chassis" forum will be very helpful.

Enjoy
Miriam

[scopeaddict]

Here ya go Johnp.

http://tnttt.com/viewto ... sc&start=0

Andrew posted a chart many months ago. If you are building the "Trailer and Chassis" forum will be very helpful.

Enjoy
Miriam

sorry my brainfart, ill try to post where its in line,

johnp

[Miriam C.]

Here ya go Johnp.

http://www.tnttt.com/viewtopic.php?t=8190&postdays=0&postorder=asc&start=0
Andrew posted a chart many months ago. If you are building the "Trailer and Chassis" forum will be very helpful.

Enjoy
Miriam

sorry my brainfart, ill try to post where its in line,

johnp

No need to appologise .Don't know if it's more in line but you will find loads of good stuff there.
Miriam

[scopeaddict]

i cant seem to get your link to open up,

Here ya go Johnp.

http://tnttt.com/viewto ... sc&start=0

Andrew posted a chart many months ago. If you are building the "Trailer and Chassis" forum will be very helpful.

Enjoy
Miriam

sorry my brainfart, ill try to post where its in line,

johnp

No need to appologise .Don't know if it's more in line but you will find loads of good stuff there.
Miriam

[rasp]

try this one
http://www.tnttt.com/viewtopic.php?t=8190&postdays=0&postorder=asc&start=0

[Miriam C.]

Thanks Rasp,
I fixed it. My bad. Need to pay more attention when highlighting instead of using the tags.
Miriam

[rasp]

not a problem

[madjack]

...well I went in and fixed Auntie M's link and then scolle ddown and saw the RASP had beat me to it...thanks..
...Basically and at a minimum the tongue should be equal to half the width of your tow vehicle plus a couple of inches...this will keep you from jackknifing the T V into the camper body...
madjack

[Gerdo]

My 4Runner is 5'4" wide and my tongue is 36" long. Just like madjack said. About half plus a couple of inches. Works for me.