Anybody Spraying Poly??

[Steve Frederick]

On everything that I sprayed I used three coats, sanding between them. As you might guess, the first coat is more of a sealer. Sanding after the first coat really gets things smoothed out. I was really surprised how the cheap Home Depot birch ply came alive after a couple of coats of the poly.

Joanne

Hey, Thanks for the link!

You did a great job with that spray-gun, by the way!

[rbeemer]

Steve,

Here is a link for flattening shellac should be able to find it a woodworking supply shop
http://www.shellac.net/ShellacFlatting.html

[bdosborn]

Steve,

Almost forgot, here's a link on setting up your HVLP gun
Linky

Bruce

[Steve Frederick]

Steve,

Almost forgot, here's a link on setting up your HVLP gun
Linky

Bruce

Thanks Bruce, and everyone!
As you can see, I need to git-r-done, as Auntie M says!!




Next question..Top to bottom, bottom to top?
Corners first, second??
I'm gonna run outta time/excuses, so..as Miriam says!...