Teardrops n Tiny Travel Trailers

by **tearbum67** » Fri Dec 21, 2007 2:56 pm

I have just ordered my gally hinge from LiL-Bear. Can any one tell me their experience with this hinge? Also I see alot of post about leaving a inch or so hang over of hinge on both sides to help keep out the rain. Any info?

by **Classic Finn** » Fri Dec 21, 2007 3:45 pm

tearbum67

Lil Bear (Grant) is very popular. And a lot of the folks here use his hinges. I personally dont have one of them but Grant is a great guy to buy parts from. And he knows this field very well.

So you,ve made a good decision. :thumbsup:

Also he,s a very nice gentleman to deal with and also he gives great advice on questions you may have in building your tear.

He does mention this: "Better-Than-Hurricane" Leakproof Galley Lid Hinge
Someone will chime in yet on this as how they like it.

Lets see what else can I say. But Merry Christmas from the Land Of Reindeer.

Classic Finn

by **tearbum67** » Fri Dec 21, 2007 4:37 pm

Finn, once again always there w/ helpful advice. Thanks my friend. :thumbsup:

by **prohandyman** » Fri Dec 21, 2007 4:54 pm

Tearbum
Just finished installing my "hurricane hinge" from Grant. When on very well. I did let it over hang the roof edge a little bit, but my trim will come out that far, so the over hang won't matter. Very nice quality item. :thumbsup:

by **Classic Finn** » Fri Dec 21, 2007 5:09 pm

tearbum67 wrote:Finn, once again always there w/ helpful advice. Thanks my friend.

Anytime,

Now youve got a statement from one that has the hinge as well.

regards Classic Finn

by **Classic Finn** » Fri Dec 21, 2007 5:11 pm

prohandyman wrote:Tearbum
Just finished installing my "hurricane hinge" from Grant. When on very well. I did let it over hang the roof edge a little bit, but my trim will come out that far, so the over hang won't matter. Very nice quality item.

Hi Prohandyman

Would you happen to have pics of this hinge installed? Im also curious. :lol:

Classic Finn

Beautifully Done Tear Too :thumbsup:

Hey Grant were talkn about ya.. :lol:

by **prohandyman** » Fri Dec 21, 2007 5:21 pm

I will snap a few photos tomorrow with the digital. I tried today with cell phone camera but they are real dark. I need to update build pics anyway!

by **madjack** » Fri Dec 21, 2007 5:26 pm

sdtripper2's index contains all this info.......
http://tnttt.com/viewtopic.php?t=11210
madjack

by **asianflava** » Fri Dec 21, 2007 7:34 pm

tearbum67 wrote:I have just ordered my gally hinge from LiL-Bear. Can any one tell me their experience with this hinge? Also I see alot of post about leaving a inch or so hang over of hinge on both sides to help keep out the rain. Any info?

Whew, an inch overhang is a lot. I think it's supposed to be an inch longer which means half an inch overhang. Mine is actually a bit shirter than that because I neglected a few things in the measurement. The hinge slides apart so you will have to find a way to pervent your hatch from sliding off. You will also need to find the pics to see how it goes together (it's kinda confusing) and how it is mounted (some have accidentally mounted them backwards).

by **mikeschn** » Sat Dec 22, 2007 5:59 am

3/8 or 1/2" on a side sounds good to me. Look at the photo of mine here

http://tnttt.com/viewto ... hang#25447

Mike...

by **prohandyman** » Sat Dec 22, 2007 12:16 pm

CF
This is a pic of my hinge

by **Classic Finn** » Sat Dec 22, 2007 2:37 pm

Hey Dan thanks. Looks like it is sitting very nicely there. :thumbsup:

by **Tripmaker** » Sun Dec 23, 2007 11:21 am

I used Grant's hinge, easy to install and so far no leaks. Grant is a great guy to deal with. I just told him the width of my TD and he sent it with the proper overhang. About 1/2 inch on each side.

by **Jiminsav** » Wed Dec 26, 2007 7:55 pm

half an inch and it's what the doctor ordered..
now, don't be like me and forget to put some sealant under the hinge when you screw it down or it will leak regardless.

Teardrops n Tiny Travel Trailers

lil bear hinge

lil bear hinge

hinge

Re: hinge

Re: lil bear hinge

Who is online