Bending a tandem fender.....

[toolbox]

Hi All -

How is a tandem axle fender bent to make a single one?

Dave

[asianflava]

The ones I've seen were cut not bent. Cut after the triangle that goes between the tires.

[toolbox]

okay thanks much for the reply -

by the way - does anyone know a brand or supplier of tandem axle fenders that are best for this technique?

Thanks much - Dave

[asianflava]

It took a little searching but I found one. I don't know about this vendor, I just did a search.
from this place:
http://www.championtrailers.com

It was under the iron fender section item #3

[toolbox]

Well I see how they can be cut. But it looks like a piece has to be welding in to fill the gap in the back. Am I missing something?

Dave

[eieio1]

Try this link, near the bottom of the first page.

http://tnttt.com/viewto ... em+fenders

[toolbox]

Does anyone know how supplies CampInn with their fenders?

Thanks much - Dave

[toolbox]

"WHO" supplies; not "HOW" supplies

Sorry end of day error - Dave

[madjack]

...Camp-Inns SS fenders are supplied by a shop local to them and manufactured to their specification
madjack

...ANY trailer shop should be able to supply you with a TD style tandem steel fender. Mail order from Northern tools or TjTrailers of any RedNeck trailer supply dealer

here is a pic of how that fender turned out that from the link above

[toolbox]

The fenders that Lil'Bear Tag-Along sells in their "parts" section look similiar to CampInn. Do you all think so ?

Dave

[madjack]

...Dave, Camp-Inns signature fenders are SS flat sided, hard cornered fenders...lil bears fenders are smooth flowing fiberglass...there is a large difference in appearance of the 2, although they share some similar lines
madjack