Teardrops n Tiny Travel Trailersor t n ttt for short (tnttt.com) |
Bending Plywood
17 posts
• Page 2 of 2 • 1, 2
by surveytech » Sun Nov 13, 2005 9:19 pm
I purchased the 1/4 inch luan from Home Depot and was able to bend to this radius quite easily.
I need 24 inch radius for my rimple and this is easily tighter than that.
I am leaving the straps on until I need it.
I'm curious if it will retain any curve after I take these straps off.
I didnt use or need water for this radius.
The rachet straps pulled it on the first try.
I need 24 inch radius for my rimple and this is easily tighter than that.
I am leaving the straps on until I need it.
I'm curious if it will retain any curve after I take these straps off.
I didnt use or need water for this radius.
The rachet straps pulled it on the first try.
- surveytech
- Donating Member
- Posts: 776
- Images: 6
- Joined: Fri Apr 29, 2005 7:13 pm
- Location: kissimmee, florida