Canvas covered "Tentdrop" trailer?

Anything to do with mechanical, construction etc

Postby ajricher » Mon Nov 23, 2009 8:46 am

Oilcloth, mate - oilcloth!

I drive an old Land-Rover - and its canvas top gets a beating from sun/rain/UV/whatever. What we typically do with them is lay them out on a HOT day and coat them with linseed oil. The heavy cotton duck will soak up the linseed oil, which when dry creates a waterproof cloth that used to be known as oilcloth.

A good cotton duck is essentially waterproof, but the oil helps a lot as well. I've never gotten soaked driving my 109 in anything up to and including hurricanes (through the Notch up near Stowe, VT a long time ago {shudder}).

Alan
ajricher
Teardrop Master
 
Posts: 114
Images: 4
Joined: Thu May 01, 2008 2:05 pm
Location: Northeast US

Postby goldcoop » Mon Nov 23, 2009 9:38 am

Nic-

Vinyl Coated Nylon :applause:

http://tinyurl.com/ydtezje

:thumbsup:

Cheers,

Coop
User avatar
goldcoop
Silver Donating Member
 
Posts: 1276
Images: 32
Joined: Mon Jul 04, 2005 8:02 pm
Location: Lewisburg, PA

Postby bobhenry » Mon Nov 23, 2009 10:55 am

This little motorcycle rig makes every gathering in 3 or 4 states.
Dale and Florence are real active with our group and others.

Image

Image

Image

Image

and just a youngster at 83 :applause:
Growing older but not up !
User avatar
bobhenry
Ten Grand Club
Ten Grand Club
 
Posts: 10368
Images: 2623
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN
Top

Postby Lawnjockey » Mon Nov 23, 2009 8:58 pm

Back when I was a kid boats were made of wood, not plastic. The cabin tops were canvas painted with a product called "airball" if I recall correctly. The canvas was streched over the cabin top and stapled with monel or stainless staples where the trim would cover the staples. The excess canvas was trimmed, then painted with the airball. After it was dry the wood trim was installed using a bedding compound like Dolfinite. The wood trim was screwed down squeezing the bedding compound out. The excess bedding compound was then removed wiith a putty knife.

Jocko
Lawnjockey
Teardrop Master
 
Posts: 166
Images: 43
Joined: Fri Nov 20, 2009 10:08 am
Location: front yard
Top

Postby Nic » Mon Nov 23, 2009 11:20 pm

goldcoop wrote:Nic-

Vinyl Coated Nylon :applause:

http://tinyurl.com/ydtezje

:thumbsup:

Cheers,

Coop


THANKS! That site has a lot of stuff I'm wanting! :thumbsup: :thumbsup:
Im not lazy. I just hang out a lot.
User avatar
Nic
500 Club
 
Posts: 679
Images: 169
Joined: Fri Jun 30, 2006 7:29 am
Location: Los Angeles, California
Top

Postby quadworks » Tue Feb 23, 2010 12:30 pm

Thats exactly what i'm doing i think.
User avatar
quadworks
Teardrop Advisor
 
Posts: 50
Images: 41
Joined: Thu Dec 21, 2006 9:43 pm
Location: Des Moines, Ia
Top

Postby StPatron » Tue Feb 23, 2010 2:09 pm

chorizon wrote:Welcome to the forum! How about making the hard front and rear hinged, so that they fold down while on the highway. You could stow the canvas underneath. I might have to make a fancy drawing...

Fancy Drawing:
<img src="http://i692.photobucket.com/albums/vv288/chorizon/foldytrailer.jpg" border="0" alt="foldy trailer">


Slick! Compact to tow and provides security for contents when parked.
User avatar
StPatron
Donating Member
 
Posts: 748
Images: 297
Joined: Tue Dec 15, 2009 8:38 pm
Location: OK
Top

Postby absolutsnwbrdr » Tue Feb 23, 2010 2:40 pm

I'm planning on using marine vinyl from JoAnn fabrics
Zach
Coming Soon...
Image Image
User avatar
absolutsnwbrdr
Donating Member
 
Posts: 2657
Images: 412
Joined: Mon Jan 25, 2010 6:10 pm
Location: Hanover, PA
Top

Previous

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 8 guests