Tire Size

Anything to do with mechanical, construction etc

Postby igofshn » Sat Nov 26, 2005 1:30 am

Wow, I'm running a 31x10.50/15 on a 15x7 rim.
igofshn
Teardrop Builder
 
Posts: 47
Joined: Sun May 08, 2005 12:28 am
Location: Lemoore, CA

Postby LSmith » Sat Nov 26, 2005 10:34 am

Summit Racing has several wheel vendors....www.summitracing.com or wheel vintiques....www.wheelvintiques.com
LSmith
User avatar
LSmith
Teardrop Inspector
 
Posts: 16
Images: 2
Joined: Sat Apr 09, 2005 9:45 am
Location: San Antonio, TX

Postby grant whipp » Sat Nov 26, 2005 2:52 pm

April wrote:

" I am going to replace my current stock 9 inch tires off my trailer with 13 inch tires.Tire Dimensions: B78 x 13in., ST175/80D13 . I want to purchase the lil-bear standard fenders, but not sure if they will fit..the size description is 9-3/4"Wx15"Hx40"L. anyone got advice? "


Hi, April!

The original Li'l Bear Standard style fenders were designed around 78 series 13" wheel/tire combo, so you should be just fine. For referance you could go to the Li'l Bear site - www.teardrops.net/LilBear - select "Trailers" from the menu bar, then "Gallery" ... LB01 (top of the page) has 13" wheels/tires and has the Standard style fenders.

Chevy Vegas had the 4on4 bolt circle found on most comon 4on4 trailer hubs. The center hole on the stock steel wheels is a bit too small for the hub cone, but can be filed down to fit. Otherwise, any custom wheel that fit the Vega will fit the trailer's hubs.

Good Luck on your project! In the meantime ...

CHEERS!

Grant
Celebrating Retirement after over 32 Years of Building, Promoting, Supporting, Supplying, Living the Lifestyle, and Loving Teardrop Trailers!
"Life Moves a Little Slower When You're On Teardrop Time"
The nature of Life, itself, is change ... "Those who matter, don't mind, and those who mind, don't matter."
Image
User avatar
grant whipp
Teardrop Manufacturer
 
Posts: 1815
Images: 117
Joined: Sun Jan 16, 2005 2:00 pm
Location: Jefferson State ('tween CA & OR!)
Top

Previous

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 4 guests